MD-160-PIN

(non-RoHS) Termination Insensitive

The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also absorb mixer generated LO frequency terms. Combined, these features give the mixer its insensitivity to external mismatches, plus superior VSWR.

Product Specifications

Part Number
MD-160-PIN
Description
(non-RoHS) Termination Insensitive
Min Frequency, RF/LO(MHz)
1.00
Max Frequency, RF/LO(MHz)
1500.00
Min Frequency, IF(MHz)
1.00
Max Frequency, IF(MHz)
1000.00
LO Drive(dBm)
13
Conversion Loss(dB)
9.00
Package Category
Through Hole/Solderwave
Package
RH-3

Features

  • Third Order Intermodulation Ratio is Insensitive to Port Mismatches
  • MIL-STD-883 Screening Available
  • Maximum Input Power: 350 mW Max @ 25°C, Derated to 85°C @ 3.5 mW/°C
  • Impedance: 50 Ohms Nominal
  • VSWR: Typically Less than 1.5:1 @ Midband
  • Conversion Loss: 7 dB Typical Midband

Applications

  • Aerospace and Defense
  • ISM

Technical Resources

Datasheet

Application Notes


Order from MACOM

MD-160-PIN
Mixer,TB,RF,TIM
MD-160-PIN Distributors