FTTx放大器

image-from-the-document-manager

MACOM公司的FTTx放大器设计用于PON、RFoG及SFU接收设备,其采用小尺寸塑料QFN封装并集成有放大器和衰减器功能。所有部件可覆盖45到1000 MHz的CATV波段,并且5v和12v解决方案的功耗不超过1.5W。MACOM公司的FTTx放大器配备业内标准光电二极管,可覆盖从-12到+3dBm的光输入范围,每个EVK样板都配备光电二极管和APC连接器。

搜索历史
最近浏览的产品
  • 未找到最新产品!

条件搜索

部件号 订货 描述 最低频率(MHz) 最高频率(MHz) 增益(dB) OIP3 (dBm) 偏置电流(mA) Bias Voltage (V) NF (dB) 封装 ROHS 特性 Attenuator Range (dB) Gain Flatness (dB) 75欧姆 封装类别 无铅 硬件手册 应用笔记 FTTx Amplifier Output P1dB (dBm) 标志 引线精加工 产品照片 Brightcove视频 ADS & SPICE模型信息 模型数据(Sparameters)
 
 
 
 
 
 
 
 
 
 
MAAM-010239 询问 Low Noise FTTx Amplifier 50 - 1000 MHz
50 1000 30 35 215 5 3.5 4mm PQFN-20LD
Low Distortion
260°C Reflow Compatible
Halogen-Free “Green” Mold Compound
Lead-Free 4 mm 20-Lead PQFN Package
Low Noise Figure
60 65 Yes
Plastic
Yes
MAAM-010239.pdf
AN3010 - An Examination of Recovery Time of an Integrated Limiter/LNA (IEEE Microwave Magazine - Mar 2004)
AN3028 - ESD Protection of Broadband GaAs CATV and FTTx Amplifiers
C2084 - Ceramic Surface Mount Amplifiers
M540 - GaAs MMIC Low Noise Amplifiers (SOIC-8 Platform)
M542 - Electrical Characterizations of Packages for use with GaAs MMIC Amplifiers
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
S2083 - Surface Mounting Instructions for PQFN Packages
Yes
20 A058
100% matte tin plate followed by a post-plating annealing of 1 hr at 150 C
4x4 mm-20 PQFN.jpg
MAAM-010239_Sparms.zip
MAAM-010333 询问 Optical Node RF Amplifier 50 - 1000 MHz
50 1200 33 260 5 4mm PQFN-24LD
-8 dBm to +2 dBm Optical Input Range
RoHS* Compliant
260°C Reflow Compatible
Halogen-Free “Green” Mold Compound
Lead-Free 4 mm PQFN-24LD Plastic Package
+24 dBmV/ch Output at 550 MHz
27 dB Gain Control Range
29 dB Gain at 55 MHz; 34 dB Gain at 1000 MHz
Single +5 V Bias
Low Equivalent Input Noise (EIN): 3.2 pA/rtHz
65 68 Yes
Plastic Surface Mount
Yes
MAAM-010333.pdf
AN3010 - An Examination of Recovery Time of an Integrated Limiter/LNA (IEEE Microwave Magazine - Mar 2004)
AN3028 - ESD Protection of Broadband GaAs CATV and FTTx Amplifiers
C2084 - Ceramic Surface Mount Amplifiers
M540 - GaAs MMIC Low Noise Amplifiers (SOIC-8 Platform)
M542 - Electrical Characterizations of Packages for use with GaAs MMIC Amplifiers
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
S2083 - Surface Mounting Instructions for PQFN Packages
Yes
A063
100% matte tin plate followed by a post-plating annealing of 1 hr at 150 C
4x4_24-lead PQFN.jpg
3606928824001
MAAM-008863 询问 FTTx RF Amplifier 50 - 1000 MHz
50 1000 37 220 5 4.8 4mm PQFN-24LD
-8 dBm to +2 dBm Optical Input Range
RoHS* Compliant
260°C Reflow Compatible
Halogen-Free “Green” Mold Compound
Lead-Free 4 mm PQFN-24LD Plastic Package
+20 dBmV/ch Flat Output
25 dB Gain Control Range
37 dB Gain; Flat from 55 MHz to 1000 MHz
+5 V Bias
Low Equivalent Input Noise (EIN): 4.8 pA/rtHz
62 61 Yes
Plastic
Yes
MAAM-008863.pdf
AN3010 - An Examination of Recovery Time of an Integrated Limiter/LNA (IEEE Microwave Magazine - Mar 2004)
AN3028 - ESD Protection of Broadband GaAs CATV and FTTx Amplifiers
C2084 - Ceramic Surface Mount Amplifiers
M540 - GaAs MMIC Low Noise Amplifiers (SOIC-8 Platform)
M542 - Electrical Characterizations of Packages for use with GaAs MMIC Amplifiers
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
S2083 - Surface Mounting Instructions for PQFN Packages
Yes
A048
100% matte tin plate followed by a post-plating annealing of 1 hr at 150 C
4x4_24-lead PQFN.jpg
3606928824001
MAAM-007796 采购 Low Noise FTTx Amplifier 50 - 1000 MHz
50 1000 21 35 160 5 3.8 4mm PQFN-20LD
Low Distortion •
260°C Reflow Compatible
Halogen-Free “Green” Mold Compound
Lead-Free 4 mm 20-Lead PQFN Package
Low Noise Figure
70 70 Yes
Plastic Surface Mount
Yes
MAAM-007796.pdf
AN3010 - An Examination of Recovery Time of an Integrated Limiter/LNA (IEEE Microwave Magazine - Mar 2004)
AN3028 - ESD Protection of Broadband GaAs CATV and FTTx Amplifiers
C2084 - Ceramic Surface Mount Amplifiers
M540 - GaAs MMIC Low Noise Amplifiers (SOIC-8 Platform)
M542 - Electrical Characterizations of Packages for use with GaAs MMIC Amplifiers
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
S2083 - Surface Mounting Instructions for PQFN Packages
Yes
A036
100% matte tin plate followed by a post-plating annealing of 1 hr at 150 C
4x4 mm-20 PQFN.jpg
MAAM-007796-000000.zip
MAAM-007807 询问 Broadband CATV Amplifier 50 - 1000 MHz
50 1000 9 35 60 5 3.8 SOT-89
75 ? Input / Output Match
RoHS* Compliant
260°C Reflow Compatible
Halogen-Free “Green” Mold Compound
9 dB Gain
3.8 dB Noise Figure
Lead-Free SOT-89 Package
65 70 Yes
Plastic Surface Mount
Yes
MAAM-007807.pdf
AN3028 - ESD Protection of Broadband GaAs CATV and FTTx Amplifiers
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Yes
20
100% matte tin plate followed by a post-plating annealing of 1 hr at 150 C
SOT-89.jpg
MAAM-007807-000000.zip