混合放大器 - LNA

image-from-the-document-manager

MACOM公司的混合放大器产品系列覆盖10 kHz到6 GHz的频率范围。所有放大器都绝对稳定,并且具有出色的级联功能。MACOM公司的放大器采用薄膜技术进行设计,集成了内部DC偏压电路,因此可以在55˚C到100˚C的温度范围内保持出色的电气特性。这些放大器采用宇航级密封及屏蔽保护,非常适合军事应用。

搜索历史
最近浏览的产品
  • 未找到最新产品!

条件搜索

部件号 订货 描述 最低频率(MHz) 最高频率(MHz) 增益(dB) NF (dB) OIP3 (dBm) ROHS 模型数据(Sparameters) 优势 Output P1dB (dBm) 偏置电流(mA) Gain Flatness (dB) 封装 75欧姆 封装类别 无铅 硬件手册 应用笔记 特性 Bias Voltage (V) 标志 引线精加工 产品照片 Brightcove视频 ADS & SPICE模型信息 Xmicrowave Image Xmicrowave URL
 
 
 
 
 
 
 
 
 
 
MAAM-007501-0A2002 询问 Surface Mount TO-8 Cascadable Amplifier 20 to 2700 MHz
20 2700 11.5 2.5 40 MAAM-007501-CA2002.zip
27 165 No
Hermetic
Yes
MAAM-007501-SA2002.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 2.5 dB (Typ.)
High third Order IP: +40.0 dBm
Output Power: +27 dBm (Typ.)
9 MACOM_general.png
CA511 询问 Cascadable Amplifier 10 to 500 MHz
10 500 17 3.4 33 21 52 No
Connectorized
No
A511_SMA511.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Power Output: +21 dBm (Typ.)
Available in both TO-8 and SMTO-8 Packages
High Efficiency: 52 mA (Typ.) @ +15 Vdc
High Third Order IP3: +33 dBm (Typ.)
15 MACOM_general.png
AMC-176-SMA 询问 Cascadable Thin Film Amplifier, 13 dB Gain, 5 - 1000 MHz
5 1000 13.2 4 27 13 38 No
Connectorized
No
AM-176_AMC-176.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
4.0 dB Typical Noise Figure
1.25:1 Typical VSWR
13.5 dBm Typical Midband 1 dB Compression
15 MACOM_general.png
MAAM-008198-SMA162 询问 Cascadable Amplifier 10 to 1200 MHz
10 1200 13 3.5 18 6 15 No
Hermetic
Yes
MAAM-008198-00A162.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
M538 - Surfacing Mounting Instructions - Footprint Guidelines
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 3.5 dB (Typ.)
Low VSWR: <1.5:1 (Typ.)
Good Dynamic Range: 102.5 dB (Typ.) in 1 MHz BW
High Efficiency: 15 mA (Typ.) @ +5 Volts
5 MACOM_general.png
MAAM-007272-SMA514 询问 Cascadable Amplifier 10 to 500 MHz
5 500 28 4 32 19 96 No
Hermetic
Yes
A514_SMA514.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
M538 - Surfacing Mounting Instructions - Footprint Guidelines
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 28 dB (Typ.)
High Output Power: +19 dBm (Typ.)
Low Noise: 4.0 dB (Typ.)
15 MACOM_general.png
MAAM-007844-0CA801 询问 Cascadable Amplifier 10 to 200 MHz
10 200 27.3 2 28 16 30 No
Connectorized
No
A80-1_SMA80-1.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation: >32 dB (Typ.)
High Efficiency: 29 mA at 15 Volts (Typ.)
High Gain: 27.3 dB (Typ.)
Very Low Noise: 2.0 dB (Typ.)
15 MACOM_general.png
MAAM-007501-CA2002 询问 Surface Mount TO-8 Cascadable Amplifier 20 to 2700 MHz
20 2700 11.5 2.5 40 MAAM-007501-CA2002.zip
27 165 No
Connectorized
No
MAAM-007501-SA2002.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Firgure: 2.5 dB (Typ.)
High Third Order IP: +40.0 dBm (Typ.)
Output Power: +27 dBm (Typ.)
9 MACOM_general.png
SMA70-1 采购 Cascadable Amplifier 10 to 250 MHz
10 250 8 1.8 28 14 15 No
Hermetic
Yes
A70-1_SMA70-1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Available in Surface Mount
High Efficiency: +14 dBm (Typ.) Output Power at 15 mA (Typ.)
Low Noise: 1.8 dB (Typ.)
15 MACOM_general.png
AMC-162-SMA 采购 Low Noise Amplifier, 12.5 dB Gain, 10 - 100 MHz
10 100 12.5 1.5 30 15 11 No
Connectorized
No
AM_AMC_AMS-162.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
1.1 dB Typical Low Noise Figure @ 50 MHz
Fully Hermetic Package (AM-162, AMS-162)
+32 dBm Typical Third Order Intercept @ 50 MHz
+15 dBm Typical High Output Power @ 50 MHz
15 MACOM_general.png
AM-160-PIN 采购 Low Noise Amplifier, 28 dB Gain, 100 - 600 MHz
100 600 28.2 1.6 30 19 70 No
Hermetic
No
AM-160.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
1.6 dB Typical Midband Noise Figure
+30 dBm Typical Third Order Intercept
+19 dBm Typical 1 dB Compression Point
15 MACOM_general.png
MAAM-007272-0CA515 询问 Cascadable Amplifier 10 to 500 MHz
5 500 27.5 3.5 33 22 127 No
Connectorized
No
A515_SMA515.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 27.5 dB (Typ.)
High Output Power: +22 dBm (Typ.)
Low Noise: 3.5 dB (Typ.)
15 MACOM_general.png
AMS-162-PIN 采购 Low Noise Amplifier, 12.5 dB Gain, 10 - 100 MHz
10 100 12.5 1.5 30 15 11 No
Ceramic Surface Mount
No
AM_AMC_AMS-162.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
1.1 dB Typical Low Noise Figure @ 50 MHz
Fully Hermetic Package (AM-162, AMS-162)
+32 dBm Typical Third Order Intercept @ 50 MHz
+15 dBm Typical High Output Power @ 50 MHz
15 MACOM_general.png
CA74 询问 Cascadable Amplifier 5 to 500 MHz
5 500 30 3 20 9 40 No
Connectorized
No
A74_SMA74.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 30.0 dB (Typ.)
Low VSWR: <1.3:1 (Typ.)
Wide Power Supply Range: +5 to +15 Volts
Medium Output Level: +8.5 dBm (Typ.)
15 MACOM_general.png
AMC-147-SMA 采购 Cascadable Amplifier 10 to 500MHz
5 500 17 3.4 33 19 52 No
Connectorized
No
AM-147_AMC-147.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Power Output: +21 dBm (TYP.)
High Efficiency: 52 mA (Typ.) @ +15 Vdc
High Third Order IP3: +33 dBm (Typ.)
15 MACOM_general.png
CA66-3 询问 Cascadable Amplifier 10 to 1000 MHz
10 1000 26 3 13 3 16 No
Connectorized
No
A66-3_SMA66-3.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 26.0 dB (Typ.)
High Efficiency: 16 mA (Typ.) AT 5 Volts
Low Noise <3.0 dB (Typ.)
5 MACOM_general.png
AMC-143-SMA 询问 Low Noise Amplifier, 16 dB Gain, 5 - 500 MHz
5 500 15.8 2.5 20 6 13 No
Connectorized
No
AM-143_AMC-143 SMA.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
1.9 dB Typical Midband Noise Figure
+20 dBm Typical Third Order Intercept
+7 dBm Typical Midband Output Power
15 MACOM_general.png
AM-153-PIN 采购 Low Noise Amplifier, 12 dB Gain, 300 - 1800 MHz
300 1800 12.4 2.5 17 8 13 No
Hermetic
No
AM-153.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
1.9 dB Typical Midband Noise Figure
+19 dBm Typical Midband Third Order Intercept
+7.5 dBm Typical Midband Output Power
15 MACOM_general.png
MAAM-007501-SA2002 采购 Surface Mount TO-8 Cascadable Amplifier 20 to 2700 MHz
20 2700 11.5 2.5 40 MAAM-007501-CA2002.zip
27 165 No
Hermetic
Yes
MAAM-007501-SA2002.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
M538 - Surfacing Mounting Instructions - Footprint Guidelines
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 2.5 dB (Typ.)
High third Order IP: +40.0 dBm (Typ.)
Output Power: +27 dBm (Typ.)
9 MACOM_general.png
AM-131-PIN 采购 Product Type: Broadband RF Amplifier Frequency: 5 to 500 MHz
5 500 11.5 4 34 19 65 0.3 No
Hermetic
Yes
AM-131-PIN.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Dynamic Range: +116 dBm (1 MHz Band) • • •
High Output Power: +19 dBm (Typ.)
High Third Order I.P.: + 34.0 dBm (Typ.)
Low Noise: 4.0 dB (Typ.)
15 Electrolytic gold over nickel
MACOM_general.png
AM-162-PIN 采购 Low Noise Amplifier, 12.5 dB Gain, 10 - 100 MHz
10 100 12.5 1.1 32 15 11 0.6 No
Hermetic
No
AM_AMC_AMS-162.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
1.1 dB Typical Low Noise Figure @ 50 MHz
Fully Hermetic Package (AM-162, AMS-162)
+32 dBm Typical Third Order Intercept @ 50 MHz
+15 dBm Typical High Output Power @ 50 MHz
15 AM-162
Gold over nickel
MACOM_general.png
AMC-123-SMA 采购 High Performance Amplifier, 10 dB Gain 5 - 500 MHz
5 500 10 5.5 30 18 62 No
Connectorized
No
AM-123_AMC-123.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
3.5 dB Typical Midband Noise Figure
+42 dBm Typical Midband Intercept
15 MACOM_general.png
MAAM-007272-SMA515 采购 Cascadable Amplifier 10 to 500 MHz
5 500 27.5 3.5 33 22 127 No
Hermetic
Yes
A515_SMA515.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
M538 - Surfacing Mounting Instructions - Footprint Guidelines
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 27.5 dB (Typ.)
High Output Power: +22 dBm (Typ.)
Low Noise: 3.5 dB (Typ.)
15 MACOM_general.png
CA78 询问 Cascadable Amplifier 5 to 300 MHz
5 300 14 3.5 35 20 65 No
Connectorized
No
A78_SMA78.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Dynamic Range: +114 dB/ 1 MHz
Low Noise Figure: 3.5 dB (Typ.)
High Third Order I.P.: +35 dBm (Typ.)
High Output Level: +19.0 dBm (Typ.)
15 MACOM_general.png
CA83-1 询问 Cascadable Amplifier 10 to 250 MHz
10 250 35.5 2.5 9 -2 31 No
Connectorized
No
A83-1_SMA83-1.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain-Two Stages: 35.5 dB (Typ.)
Low VSWR Over a Full Controlled Range: <1.5:1 (Typ.)
Low Power Drain: 65 mA @ 5 Volts (Typ.)
Voltage Controlled Gain: 29 dB to 39 dB @ Vcc = 3 to 12 Volts
15 MACOM_general.png
A515 采购 Cascadable Amplifier 10 to 500 MHz
5 500 27.5 3.5 33 22 127 No
Hermetic
Yes
A515_SMA515.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 27.5 dB (Typ.)
High Output Power: +22 dBm (Typ.)
Low Noise: 3.5 dB (Typ.)
15 MACOM_general.png
A611 询问 Cascadable Amplifier 2 to 6 GHz
5 700 15 3.2 24 13 31 No
Hermetic
Yes
A611_SMA611.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Wide Bandwidth: 2-6 GHz
Low Noise: 3.2 dB (Typ.)
Medium Output Level: +12.5 dBm (Typ.)
5 MACOM_general.png
SMA21-1 采购 Cascadable Amplifier 10 to 1200 MHz
5 1200 15.5 2.4 11 -1 10 No
Hermetic
Yes
A21-1_SMA21-1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: <2.8 dB (Typ.)
High Single Stage Gain: 15dB (Typ.)
Low VSWR: <1.5:1 (Typ.)
15 MACOM_general.png
CA4011 采购 Cascadable Amplifier 1000 to 4000 MHz
1000 4000 15.5 2 29 18 65 No
Connectorized
No
A4011_SMA4011.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 2.0 dB (Typ.)
Phemt Amplifier
High Efficiency: 65 mA (Typ.) @ +5 Vdc
Medium Output Power: +18.3 dBm (Typ.)
5 MACOM_general.png
SMA87-2 采购 Cascadable Amplifier 10 to 300 MHz
10 300 16 2.9 24 11 15 No
Hermetic
Yes
A87-2_SMA87-2.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 3.0 dB (Typ.)
Low VSWR: <1.5.1 (Typ.)
High Output Power: at 5 Volts: +11 dBm (Typ.)
High Frequency: 15 mA @ +5 Vdc (Typ.)
5 MACOM_general.png
A82-1 采购 Cascadable Amplifier 20 to 250 MHz
20 250 19 2.8 26 15 50 No
Hermetic
Yes
A82-1_SMA82-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation: >34 dB (Typ.)
Low Output VSWR: 1.1:1 (Typ.)
High Gain: 19.0 dB (Typ.)
High Out Power: +15 dBm (Typ.)
15 MACOM_general.png
SMA1211 询问 Cascadable Amplifier 10 to 1200 MHz
10 1200 14 2.8 20 6 16 No
Hermetic
Yes
A1211_SMA1211.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Efficiency: 16 mA at +5 Vdc)
Medium Third I.P.: +25 dBm at 8 Vdc
Medium Output Power: +11 dBm at 8 Vdc (Typ.)
Low Current Draiin: 15.5 mA at 5 Vdc
Low Noise Figure: 2.8 dB at 5 Vdc (Typ.)
5 MACOM_general.png
CA81-2 询问 Cascadable Amplifier 20 to 500 MHz
20 500 24.5 3 28 15 29 No
Connectorized
No
A81-2_SMA81-2.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Efficiency: 29 mA @ +15 Vdc (Typ.)
Low Noise: 2.9 dB (Typ.)
High Output Power: +15.0 dBm (Typ.)
High Gain: >24.5 dB (Typ.)
15 MACOM_general.png
CA75 询问 Cascadable Amplifier 5 to 500 MHz
5 500 21 2.1 21 9 24 No
Connectorized
No
A75_SMA75.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 21 dB (Typ.)
Wide Power Supply Range: +5 to +20 Volts
Medium Output Level: +9.0 dBm (Typ.)
Low Noise: 2.1 dB (Typ.)
15 MACOM_general.png
CA76 询问 (non-RoHS) Cascadable, Hi Gain
5 500 28 3 28 15 62 No
Connectorized
No
A76_SMA76.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 28 dB (Typ.)
Wide Power Supply Range: +8 to +15 Volts
High Third Order IP: +28 dBm (Typ.)
High Output Level: +15 dBm (Typ.)
15 MACOM_general.png
SMA70 采购 Cascadable Amplifier 10 to 250 MHz
10 250 8 1.6 24 8 10 No
Hermetic
Yes
A70_SMA70.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Very Low Noise: 1.6 dB (Typ.)
HIGH Efficiency +8.0 dBm (Typ.) Output Power at 10 mA (Typ.)
15 MACOM_general.png
EA1 询问 Cascadable Amplifier 5 to 400 MHz
5 400 14 4.3 13 -5 10 No
Through Hole/Solderwave
Yes
EA1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Cost
Ultra Small Size
Low Noise: 4.3 dB (Typ.)
15 MACOM_general.png
A11 询问 Cascadable Amplifier 5 to 1000 MHz
5 1000 14.7 3.1 10 -2 9 No
Hermetic
Yes
A11_SMA11.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 3.1 dB (Typ.)
Flat Bandwidth: <±0.25 dB (Typ.)
Low VSWR: 1.3:1 (Typ.)
15 MACOM_general.png
SMA82-1 询问 Cascadable Amplifier 20 to 250 MHz
20 250 19 2.8 26 15 50 No
Hermetic
Yes
A82-1_SMA82-1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation: >34 dB (Typ.)
Low Output VSWR: 1.1:1 (Typ.)
High Gain:19.0 dB (Typ.)
High Output Level: +15 dBm (Typ.)
15 MACOM_general.png
A101 采购 Cascadable Amplifier 5 to 100 MHz
5 100 17 3 36 23 105 No
Hermetic
Yes
A101_SMA101.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Output Power: +23 dBm (TYP.)
Low Noise Figure: 3 dB (TYP.)
High Second Order IP: +64 dBm (TYP.)
High third Order IP: +36 dBm (TYP.)
12 MACOM_general.png
SMA611 采购 Cascadable Amplifier 5 to 700 MHz
5 700 15 3.2 24 13 31 No
Hermetic
Yes
A611_SMA611.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 3.2 dB (Typ.)
High Output Power: +12.5 dBm (Typ.)
High Efficiency: 31 mA (Typ.) at +5 Vdc
5 MACOM_general.png
CA82 询问 Cascadable Amplifier 20 to 250 MHz
20 250 25 2.8 31 20 50 No
Connectorized
No
A82_SMA82.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation: >28.5 dB (Typ.)
High Gain: 24.5 dB (Typ.)
Low Noise: 2.8 dB (Typ.)
High Output Level: +20 dBm (Typ.)
15 MACOM_general.png
SMA101 采购 Cascadable Amplifier 5 to 100 MHz
5 100 17 3 36 23 105 No
Hermetic
Yes
A101_SMA101.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Output Power: +23 dBm (Typ.)
Low Noise Figure: 3 dB (Typ.)
High Second Order IP: +64 dBm (Typ.)
High Third Order IP: +36 dBm (Typ.)
12 MACOM_general.png
CA12 询问 Cascadable Amplifier 10 to 1000 MHz
10 1200 14 2.8 20 6 16 No
Connectorized
No
A12_SMA12.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 2.8 dB (Typ.)
Low VSWR:<1.6:1 (Typ.)
Medium Output Power: +8 dBm (Typ.)
High Gain: 16.0 dB (Typ.)
5 MACOM_general.png
A76 采购 Cascadable Amplifier 5 to 500 MHz
5 500 28 3 28 15 62 No
Hermetic
Yes
A76_SMA76.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 28 dB (Typ.)
Wide Power Supply Range: +8 to +15 Volts
High Third-Order IP: +28 dBm (Typ.)
High Output Level: +15 dBm (Typ.)
15 MACOM_general.png
CA45-1 询问 Cascadable Amplifier 1000 to 4000 MHz
1000 4000 17.5 4 26 13 65 No
Connectorized
No
A45-1_SMA45-1.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Wide Bandwidth
GaAs Fet Design
Low Noise: 4.1 dB (Typ.)
High Gain: 17.5 dB (Typ.)
5 MACOM_general.png
SMA45 采购 Cascadable Amplifier 1000 to 4000 MHz
1000 4000 17.5 4 29 20 120 No
Hermetic
Yes
A45_SMA45.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain 17.5 dB (Typ.)
GaAs Fet Design
HIgh Output Power: +19.5 dBm (Typ.)
Low Noise: 4.5 dB (Typ.)
15 MACOM_general.png
CA531 询问 Cascadable Amplifier 10 to 500 MHz
10 500 31.7 2 14 3 17 No
Connectorized
No
A531_SMA531.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 32 dB (Typ.)
Low VSWR: 1.3:1 (Typ.)
Low Power Drain: 85 mW at +5 Vdc
Low Noise Figure: 2.0 dB (Typ.)
High Efficiency: 17 mA at +5 Vdc
5 MACOM_general.png
SMA59 采购 Cascadable Amplifier 5 to 500 MHz
5 500 11.5 4.3 36 22 88 No
Hermetic
Yes
A59_SMA59.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Dynamic Range: +118 DBM (1 MHz Band) • HIGH OUTPUT POWER: +22 dBm (Typ.)
Wide Power Supply Range: +5 to +15 Volts
Low Noise Figure: 4.3 dB (Typ.)
High Third order I.P.: +36 dBM (Typ).
15 MACOM_general.png
CA180 询问 Cascadable Amplifier 10 to 500 MHz
10 500 16.5 3.4 33 High Output Power: +18 dBm (Typ.)
18 63 No
Connectorized
No
A180_SMA180.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation: 22 dB (Typ.)
15 MACOM_general.png
SMA81-2 采购 Cascadable Amplifier 20 to 500 MHz
20 500 24.5 3 28 15 29 No
Hermetic
Yes
A81-2_SMA81-2.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Output Power: +15.0 dBm (Typ.)
High Gain: >24.5 dB (Typ.)
Low Noise:2.9 dB (Typ.)
High Efficiency: 29 mA @ +15 Vdc (Typ.)
15 MACOM_general.png
A78 采购 Cascadable Amplifier 5 to 300 MHz
5 300 14 3.5 35 20 65 No
Hermetic
Yes
A78_SMA78.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Dymanic Range: +114 dB/ 1 MHz
Low Noise Figure: 3.5 dB (Typ.)
High Third Order I.P.: +35 dBm (Typ.)
High Output: +19.0 dBm (Typ.)
15 MACOM_general.png
CA45 询问 Cascadable Amplifier 1000 to 4000 MHz
1000 4000 17.5 4 29 20 120 No
Connectorized
No
A45_SMA45.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 17.5 dB (Typ.)
GaAs Fet Amplifier
High Output Power: +19.5 dBm (Typ.)
Low Noise Figure: 4.5 dB (Typ.)
15 MACOM_general.png
A70-1 采购 Cascadable Amplifier 5 to 200 MHz
10 250 8 1.8 28 14 15 No
Hermetic
Yes
A70-1_SMA70-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Available in Surface Mount
Low Noise: 1.8 dB (Typ.)
High Efficiency: +14 dBm (Typ.) Output Power at 15 mA (Typ.)
15 MACOM_general.png
CA28-2 询问 Cascadable Amplifier 10 to 1500 MHz
10 1500 14 3.5 24 11 27 No
Connectorized
No
A28-2_SMA28-2.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 3.5 dB (Typ.)
Low VSWR: <1.4:1 (Typ.)
Good Dynamic Range: 105 dB (Typ.)
High Efficiency: 27 mA (Typ.) @ +5 Vdc
5 MACOM_general.png
A61 询问 Cascadable Amplifier 2 to 6 GHz
2000 6000 7.5 3.2 25 13 35 No
Hermetic
Yes
A61_SMA61.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Wide Bandwidth: 2-6 GHz
Low Noise: 3.2 dB (Typ.)
Medium Output Level: +12.5 dBm (Typ.)
5 MACOM_general.png
CA87-1 询问 Cascadable Amplifier 10 to 400 MHz
10 400 16 3.4 31 17 30 No
Connectorized
No
A87-1_SMA87-1.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Output Level: +17 dBm (Typ.)
Wide Power Supply Range: +5 to +15 Volts
High Third Order IP.: +31 dBm (Typ.)
High Efficiency: 33 mA @ +15 Vdc (Typ.)
15 MACOM_general.png
CA231 询问 Cascadable Amplifier 10 to 250 MHz
10 250 26 1.7 22 10 16 No
Connectorized
No
A231_SMA231.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figured: 1.7 dB (Typ.)
Medium Output Level: +14 dBm at +8 Vdc (Typ.)
High Efficiency: 16 mA at +5 Vdc
High Gain: 26.0 dB (Typ.)
5 MACOM_general.png
SMA4012 采购 Cascadable Amplifier 1000 to 4000 MHz
1000 4000 18 3.5 26 16 65 No
Hermetic
Yes
A4012_SMA4012.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Wide Bandwidth: 1.0 to 4.0 GHz (Typ.)
Low Noise Figure: 3.5 dB (Typ.)
Medium Output Power: +15.5 dBm (Typ.)
High Gain: 18 dB (Typ.)
5 MACOM_general.png
PA38 询问 Cascadable Amplifier 200 to 2000 MHz
200 2000 10 4 34 23 150 No
Hermetic
Yes
PA38.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Wide Bandwidth: 200-2400 MHz (Typ.)
High Third Order I.P.: +34 dBm (Typ.)
Low Noise Figure: 4.0 dB (Typ.)
High Output Level: +23.0 dBm (Typ.)
15 MACOM_general.png
A45-1 采购 Cascadable Amplifier 1000 to 4000 MHz
1000 4000 17.5 4 26 13 65 No
Hermetic
Yes
A45-1_SMA45-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Wide Bandwidth
GaAs Fet Design
Low Noise: 4.1 dB (Typ.)
High Gain: 17.5 dB (Typ.)
5 MACOM_general.png
A4012 采购 Cascadable Amplifier 1000 to 4000 MHz
1000 4000 18 3.5 26 16 65 No
Hermetic
Yes
A4012_SMA4012.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Wide Bandwidth: 1.0 to 4.0 GHz (Typ.)
Low Noise Figure: 3.5 dB (Typ.)
Medium Output Power: +15.5 dBm (Typ.)
High Gain: 18 dB (Typ.)
5 MACOM_general.png
SMA75-3 采购 Cascadable Amplifier 10 to 500 MHz
10 500 20.5 1.7 16 3 14 No
Hermetic
Yes
A75-3_SMA75-3.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 20.5 dB (Typ.)
Low Noise: 1.7 dB (Typ.)
15 MACOM_general.png
A75-3 采购 Cascadable Amplifier 10 to 500 MHz
10 500 20.5 1.7 16 3 14 No
Hermetic
Yes
A75-3_SMA75-3.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 20.5 dB (Typ.)
Low Noise: 1.7 dB (Typ.)
15 MACOM_general.png
CA32 询问 Cascadable Amplifier 100 to 2000 MHz
100 2000 13 2.1 32 22 92 No
Connectorized
No
A32_SMA32.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 3.5 dB (Typ.)
Low VSWR: 1.8:1 (Typ.)
High Output Level: +21 dBm (Typ.)
High Third Order IP.: +32 dBm (Typ.)
15 MACOM_general.png
SMA66-3 采购 Cascadable Amplifier 10 to 1000 MHz
10 1000 26 3 13 3 16 No
Hermetic
Yes
A66-3_SMA66-3.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 26.0 dB (Typ.)
High Efficiency: 16 mA (Typ.) AT 5 Volts
Low Noise: <3.0 dB (Typ.)
5 MACOM_general.png
SMA1031 采购 Cascadable Amplifier 10 to 1000 MHz
10 1000 28.5 2.7 22 10 36 No
Hermetic
Yes
A1031_SMA1031.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Efficiency: 36 mA at +5 Vdc
Medium Output Power: +10 dBm (Typ.)
High Gain - Two Stages: 28.5 dB (Typ.)
Low Noise Figure: 2.7 dB (Typ.)
5 MACOM_general.png
A80-1 询问 Cascadable Amplifier 20 to 500 MHz
10 200 27.3 2 28 16 30 No
Hermetic
Yes
A80-1_SMA80-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
High Reverse isolation: >32 dB (Typ.)
High Efficiency: 29 mA at 15 Volts (Typ.)
High Gain: 27.3 dB (Typ.)
Very Low Noise: 2.0 dB (Typ.)
15 MACOM_general.png
CA1212 询问 (non-RoHS) Cascadable, Low Volt
100 1200 14 1.8 29 19 70 No
Connectorized
No
A1212_SMA1212_CA1212.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Very Low Noise: 1.8 dB (Typ.)
High Power Added Efficiency: 20%
High Output Power: +19 dBm (Typ.)
5 MACOM_general.png
SMA75 采购 Cascadable Amplifier 5 to 500 MHz
5 500 21 2.1 21 9 24 No
Hermetic
Yes
A75_SMA75.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 21.0 dB (Typ.)
Wide Power Supply Range: +5 to +20 Volts
Medium Output Level: +9 dBm (Typ.)
Low Noise: 2.1 dB (Typ.)
15 MACOM_general.png
SMA411 采购 Cascadable Amplifier 10 to 400 MHz
10 400 15.8 3 24 10 16 No
Hermetic
Yes
A411_SMA411.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 3.0 dB (Typ.)
High Third Order I.P.: +29 dBm at +8 Vdc (Typ.)
High Efficiency: 16 mA at +5 Vdc
Medium Output Level:+14.5 dBm at +8 Vdc (Typ.)
5 MACOM_general.png
A6011 采购 Cascadable Amplifier 2000 to 6000 MHz
2000 6000 14.8 1.5 30 18 58 No
Hermetic
Yes
A6011_SMA6011.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 1.5 dB (Typ.)
Phemt Amplifiers
High Efficiency: 58 mA (Typ.) @ +5 Vdc
Medium Output Power: +18 dBm (Typ.)
5 MACOM_general.png
A12 询问 Cascadable Amplifier 10 to 1000 MHz
10 1000 16 2.8 22 8 22 No
Hermetic
Yes
A12_SMA12.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 2.8 dB (Typ.)
Low VSWR:<1.6:1 (Typ.)
Medium Output Power: +8 dBm (Typ.)
High Gain: 16.0 dB (Typ.)
15 MACOM_general.png
SMA32 采购 Cascadable Amplifier 100 to 2000 MHz
100 2000 13 2.1 32 22 92 No
Hermetic
Yes
A32_SMA32.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 3.5 dB (Typ.)
Low VSWR: 1.8:1 (Typ.)
High Output Level: +21 dBm (Typ.)
High Third Order IP: +32 dBm (Typ.)
15 MACOM_general.png
SMA67-1 询问 Cascadable Amplifier 10 to 600 MHz
10 600 15 3.7 30 17 36 No
Hermetic
Yes
A67-1_SMA67-1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Efficiency: +17.0 dBm (Typ.) Output Power at 36 mA (Typ.)
Wide Power Supply Range: +5 to +15 Volts
Low Noise Figure: 3.6 dB (Typ.)
15 MACOM_general.png
SMA74 采购 Cascadable Amplifier 5 to 500 MHz
5 500 30 3 20 9 40 No
Hermetic
Yes
A74_SMA74.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 30.0 dB (Typ)
Low VSWR: <1.3:1 (Typ.)
Wide Power Supply Range: +8 to +15 Volts
Medium Output Level: +8.5 dBm (Typ.)
15 MACOM_general.png
A28-2 采购 Cascadable Amplifier 10 to 1500 MHz
10 1500 14 3.5 24 11 27 No
Hermetic
Yes
A28_SMA28.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 3.5 dB (Typ.)
Low VSWR: <1.4:1 (Typ.)
Good Dynamic Range: 105 dB Typ.)
High Efficiency: 27 mA (Typ.) @ +5 Vdc
5 MACOM_general.png
SMA531 采购 Cascadable Amplifier 10 to 500 MHz
10 500 31.7 2 14 3 17 No
Hermetic
Yes
A531_SMA531.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 32 dB (Typ.)
Low VSWR: 1.3:1 (Typ.)
Low Power Drain: 85 mW at +5 Vdc
Low Noise Figure: 2.0 dB (Typ.)
High Efficiency: 17 mA at +5 Vdc
5 MACOM_general.png
SMA80-1 询问 Cascadable Amplifier 20 to 500 MHz
10 200 27.3 2 28 16 30 No
Hermetic
Yes
A80-1_SMA80-1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse isolation: >32 dB (Typ.)
High Efficiency: 29 mA at 15 Volts (Typ.)
High Gain: 27.3 dB (Typ.)
Very Low Noise: 2.0 dB (Typ.)
15 MACOM_general.png
SMA61 采购 Cascadable Amplifier 2 to 6 GHz
2000 6000 7.5 3.2 25 13 35 No
Hermetic
Yes
A61_SMA61.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Wide Bandwidth: 2-6 GHz
Medium Output Level: +12.5 dBm (Typ.)
Low Noise: 3.2 dB (Typ.)
5 MACOM_general.png
A87-2 采购 Cascadable Amplifier 10 to 300 MHz
10 300 16 2.9 24 11 15 No
Hermetic
Yes
A87-2_SMA87-2.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 3.0 dB (Typ.)
Low VSWR: <1.5.1 (Typ.)
High Output Power at Volts: +11 dBm (Typ.)
High Frequency: 15 mA @ +5 Vdc (Typ.)
5 MACOM_general.png
CA6011 询问 Cascadable Amplifier 2000 to 6000 MHz
2000 6000 14.8 1.5 30 18 58 No
Connectorized
No
A6011_SMA6011.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 1.5 dB (Typ.)
Phemt Amplier
High Efficiency: 58 mA (Typ.) @ +5 Vdc
Medium Output Power: +18 dBm (Typ.)
5 MACOM_general.png
SMA82 采购 Cascadable Amplifier 20 to 250 MHz
20 250 25 2.8 31 20 50 No
Hermetic
Yes
A82_SMA82.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation: >28.5 dB (Typ.)
High Gain: 24.5 dB (Typ.)
Low Noise: 2.8 dB (Typ.)
High Output Level: +20 dBm (Typ.)
15 MACOM_general.png
SMA80 采购 Cascadable Amplifier 20 to 500 MHz
10 550 29 2.3 27 14 45 0.3 No
Hermetic
Yes
A80_SMA80.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
M538 - Surfacing Mounting Instructions - Footprint Guidelines
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation 39 dB (Typ.)
Medium Output Level: +14.3 dBm (Typ.)
High Gain: 29 dB (Typ.)
Very Low Noise: 2.3 dB (Typ.)
15 MACOM_general.png
SMA58 询问 Cascadable Amplifier 5 to 500 MHz
5 500 11.5 4 34 19 65 No
Hermetic
Yes
A58_SMA58.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Dynamic Range: +116 dBm (1 MHz Band)
Low Noise: 4.0 dB (Typ.)
High Third Order I.P. + 34.0 dBm (Typ.)
High Output Power: +19 dBm (Typ.)
15 MACOM_general.png
EA53-2 询问 Cascadable Amplifier 5 to 500 MHz
5 500 19 3.6 24 11 33 No
Through Hole/Solderwave
Yes
EA53-2.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 19 dB (Typ.)
Medium Power Output: +11 dBm (Typ.)
Small Size: TO-5
15 MACOM_general.png
SMA87-1 采购 Cascadable Amplifier 10 to 400 MHz
10 400 16 3.4 31 17 30 No
Hermetic
Yes
A87-1_SMA87-1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Output Level: +17 dBm (Typ.)
Wide Power Supply Range: +5 to +15 Volts
High Third Order IP: +31 dBm (Typ.)
High Efficiency: 33 mA @ +15 Vdc (Typ.)
15 MACOM_general.png
Xmicrowave.png
http://www.xmicrowave.com/product/xm-a3y3-0804d/
SMA32-1 采购 Cascadable Amplifier 100 to 2000 MHz
100 2000 11.5 2.5 25 16 44 No
Hermetic
Yes
A32-1_SMA32-1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 2.5 dB (Typ.)
GaAs Fet Design
Medium Third Order IP: +25.0 dBm (Typ.)
High Output Level: 15.5 dBm (Typ.)
5 MACOM_general.png
A66-3 采购 Cascadable Amplifier 10 to 1000 MHz
10 1000 26 3 13 3 16 No
Hermetic
Yes
A66-3_SMA66-3.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 26.0 dB (Typ.)
High Efficiency: 16 mA (Typ.) AT 5 Volts
Low Noise <3.0 dB (Typ.)
5 MACOM_general.png
SMA81-1 采购 Cascadable Amplifier 20 to 250 MHz
20 250 25 2.5 27 14 25 No
Hermetic
Yes
A81-1_SMA81-1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation : >30 dBm (Typ.)
High Level Output: +13.5 dBm (Typ.)
High Gain: 25 dB (Typ.)
Low Noise: 2.4 dB (Typ.)
15 MACOM_general.png
A32-1 采购 Cascadable Amplifier 100 to 2000 MHz
100 2000 11.5 2.5 25 16 44 No
Hermetic
Yes
A32-1_SMA32-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 2.5 dB (Typ.)
GaAs Fet Design
Medium Third Order IP: +25.0 dBm (Typ.)
High Output Level: 15.5 dBm (Typ.)
5 MACOM_general.png
SMA78 采购 Cascadable Amplifier 5 to 300 MHz
5 300 14 3.5 35 20 65 No
Hermetic
Yes
A78_SMA78.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Dynamic Range: +114 dB/ 1 MHz
Low Noise Figure: 3.5 dB (Typ.)
High Third Order I.P.: +35 dBm (Typ.)
High Output: +19.0 dBm (Typ.)
15 MACOM_general.png
SMA70-2 采购 Cascadable Amplifier 10 to 250 MHz
10 300 8 2.2 38 19 25 0.2 No
Hermetic
Yes
A70-2_SMA70-2.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
M538 - Surfacing Mounting Instructions - Footprint Guidelines
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 2.2 dB (Typ.)
Low DC Current: 25 mA (Typ.) at +15 Vdc
High Third Order I.P.: +38 dBm (Typ.)
High Output Power: +19 dBm (Typ.)
15 MACOM_general.png
A4011 采购 Cascadable Amplifier 1000 to 4000 MHz
1000 4000 15.5 2 29 18 65 No
Hermetic
Yes
A4011_SMA4011.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 2.0 dB (Typ.)
Phemt Amplifier
High Efficiency: 65 mA (Typ.) @ +5 Vdc
Medium Output Power: +18.3 dBm (Typ.)
5 MACOM_general.png
A67 询问 Cascadable Amplifier 10 to 800 MHz
10 800 14 4 30 16 32 No
Hermetic
Yes
A67_SMA67.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Available in Surface Mount
Wide Power Supply Range: +5 to +15 Volts
LOW NOISE FIGURE: <4.0 dB (Typ.)
High Efficency: +16 dBm (Typ.) Output Power at 32 mA (Typ.)
15 MACOM_general.png
SMA73 询问 Cascadable Amplifier 5 to 500 MHz
5 500 32 3.5 15 2 20 No
Hermetic
Yes
A73_SMA73.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 32 dB (Typ.)
Low VSWR: <1.4:1 (Typ.)
Third Order IP: +15 dBm (Typ.)
Low Noise: 3.5 dB (Typ.)
15 MACOM_general.png
A74 采购 Cascadable Amplifier 5 to 500 MHz
5 500 30 3 20 9 40 No
Hermetic
Yes
A74_SMA74.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 30.0 dB (Typ.)
Low VSWR: <1.3:1 (Typ.)
Wide Power Supply Range: +8 TO +15 Volts
Medium Output Level: +8.5 dBm (Typ.)
15 MACOM_general.png
SMA70-3 采购 Cascadable Amplifier 20 to 250 MHz
15 300 8 2.8 40 21 37 0.3 No
Hermetic
Yes
A70-3_SMA70-3.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
M538 - Surfacing Mounting Instructions - Footprint Guidelines
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Output Power: +21 dBm (Typ.)
Low DC Current: 37 mA (Typ.) at +15 Vdc
High Third Order I.P.: +40 dBm
Low Noise: 2.8 dB (Typ.)
15 MACOM_general.png
CA67-1 询问 Cascadable Amplifier 10 to 600 MHz
10 600 15 3.7 30 17 36 No
Connectorized
No
A67-1_SMA67-1.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Efficiency: +17.0 dBm (Typ.) Output Power at 36 mA (Typ.)
Wide Power Supply Range: +5 to +15 Volts
Low Noise Figure: 3.6 dB (Typ.)
15 MACOM_general.png
A58 询问 Cascadable Amplifier 5 to 500 MHz
5 500 11.5 4 34 19 65 No
Hermetic
Yes
A58_SMA58.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Dynamic Range: +116 dBm (1 MHz Band)
Low Noise: 4.0 dB (Typ.)
High Third Order I.P.: + 34.0 dBm (Typ.)
High Output Power: +19 dBm (Typ.)
15 MACOM_general.png
SMA81 采购 Cascadable Amplifier 20 to 250 MHz
20 250 24.5 2.6 28 17 33 No
Hermetic
Yes
A81_SMA81.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
M538 - Surfacing Mounting Instructions - Footprint Guidelines
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation: >30 dB (Typ.)
Low Noise: 2.6 dB (Typ.)
High Output Level: +17 dBm (Typ.)
High Gain: 26 dB (Typ.)
15 Gold plate IAW MIL-G-45204 type III. grade A. class 2 (.0001 to .0002 inches) over electrodeposited nickel IAW MIL-M-38510 .001-.003 inches
MACOM_general.png
A80 采购 Cascadable Amplifier 20 to 500 MHz Rev. V2
20 500 29 2.5 27 14 45 No
Hermetic
Yes
A80_SMA80.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
High Reverse isolation: 39 dB (Typ.)
Medium Output Level: +14.3 dBm (Typ.)
High Gain: 29 dB (Typ.)
Very Low Noise: 2.3 dB (Typ.)
15 MACOM_general.png
SMA1 采购 Cascadable Amplifier 5 to 500 MHz
5 500 16 2.4 11 -1 9 No
Hermetic
Yes
A1_SMA1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 2.4 dB (Typ.)
High Gain: 16 dB (Typ.)
Low VSWR: 1.3:1 (Typ.)
15 MACOM_general.png
A67-1 采购 Cascadable Amplifier 10 to 800 MHz
10 600 15 3.7 30 17 36 No
Hermetic
Yes
A67-1_SMA67-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Available in Surface Mount
Wide Power Supply Range: +5 to +15 Volts
Low Noise Figure: <4.0 dB (Typ.)
High Efficiency: +16 dBm (Typ.) Output Power at 32 mA (Typ.)
15 MACOM_general.png
A70 采购 Cascadable Amplifier 10 to 250 MHz
10 250 8 1.6 24 8 10 No
Hermetic
Yes
A70_SMA70.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Very Low Noise: 1.6 dB (Typ.)
High Efficiency: +8.0 dBm (Typ.) Output Power at 10 mA (Typ.)
15 MACOM_general.png
A1031 采购 Cascadable Amplifier 10 to 1000 MHz
10 1000 28.5 2.7 22 10 36 No
Hermetic
Yes
A1031_SMA1031.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Efficiency: 36 mA at +5 Vdc
Medium Output Power: +10 dBm (Typ.)
High Gain, Two Stages: 28.5 dB (Typ.)
Low Noise Figure: 2.7 dB (Typ.)
5 MACOM_general.png
A231 采购 Cascadable Amplifier 10 to 250 MHz
10 250 26 1.7 22 10 16 No
Hermetic
Yes
A231_SMA231.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 1.7 dB (Typ.)
Medium Output Level: +14 dBm at +8 Vdc (Typ.)
High Efficiency: 16 mA at +5 Vdc
High Gain: 26.0 dB (Typ.)
5 MACOM_general.png
A81-1 采购 Cascadable Amplifier 20 to 250 MHz
20 250 25 2.5 27 14 25 No
Hermetic
Yes
A81-1_SMA81-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation: >30 dBm (Typ.)
High Level Output: +13.5 dBm (Typ.)
Low Noise: 2.4 dB (Typ.)
High Gain: 25 dB (Typ.)
15 MACOM_general.png
A32 询问 Cascadable Amplifier 100 to 2000 MHz
100 2000 13 2.1 32 22 92 No
Hermetic
Yes
A32_SMA32.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 3.5 dB (Typ.)
Low VSWR: 1.8:1 (Typ.)
High Output Level: +21 dBm (Typ.)
High Third Order IP: +32 dBm (Typ.)
15 MACOM_general.png
A1 询问 Cascadable Amplifier 5 to 500 MHz
5 500 16 2.4 11 -1 9 No
Hermetic
Yes
A1_SMA1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 2.4 dB (Typ.)
High Gain: 16 dB (Typ.)
Low VSWR: 1.3:1 (Typ.)
15 MACOM_general.png
A70-3 采购 Cascadable Amplifier 20 to 250 MHz
20 250 8 2.8 40 21 37 No
Hermetic
Yes
A70-3_SMA70-3.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Output Power: +21 dBm (Typ.)
Low DC Current:: 37 mA (Typ.) at +15 Vdc
High Third Order I.P.: +40 dBm
Low Noise: 2.8 dB (Typ.)
15 MACOM_general.png
A18-1 采购 Cascadable Amplifier 10 to 1000 MHz
10 1000 14.7 3.8 30 16 44 No
Hermetic
Yes
A18-1_SMA18-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Dynamic Range
Low Noise: 3.8 dB (Typ.)
High Third Order I.P.: +30 dBM (Typ.)
High Output Power: +16 dBm (Typ.)
15 MACOM_general.png
A73 采购 Cascadable Amplifier 5 to 500 MHz
5 500 32 3.5 15 2 20 No
Hermetic
Yes
A73_SMA73.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 32 dB (Typ.)
Low VSWR: <1.4:1 (Typ.)
Third Order IP: +15 dBm (Typ.)
Low Noise: 3.5 dB (Typ.)
15 MACOM_general.png
SMA6011 采购 Cascadable Amplifier 2000 to 6000 MHz
1500 6000 14.8 1.5 30 18 58 0.6 No
Hermetic
Yes
A6011_SMA6011.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
M538 - Surfacing Mounting Instructions - Footprint Guidelines
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 1.5 dB (Typ.)
Phemt Amplifier
High Efficiency: 58 mA (Typ.) @ +5 Vdc
Medium Output Power: +18 dBm (Typ.)
5 MACOM_general.png
A1212 采购 Cascadable Amplifier 100 to 1200 MHz
100 1200 14 1.8 29 19 70 No
Hermetic
Yes
A1212_SMA1212_CA1212.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Very Low Noise: 1.8 dB (Typ.)
High Power Added Efficiency: 20%
High Output Power: +19 dBm (Typ.)
5 MACOM_general.png
A75 采购 Cascadable Amplifier 5 to 500 MHz
5 500 21 2.1 21 9 24 No
Hermetic
Yes
A75_SMA75.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 21.0 dB (Typ.)
Wide Power Supply Range: +5 TO +20 Volts
Medium Output Level: +9 dBm (Typ.)
Low Noise: 2.1 dB (Typ.)
15 MACOM_general.png
A82 采购 Cascadable Amplifier 20 to 250 MHz
20 250 25 2.8 31 20 50 No
Hermetic
Yes
A82_SMA82.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation: >28.5 dB (Typ.)
High Gain: 24.5 dB (Typ.)
Low Noise: 2.8 dB (Typ.)
High Level Output: +20 dBm (Typ.)
15 MACOM_general.png
SMA76 采购 Cascadable Amplifier 5 to 500 MHz
5 500 28 3 28 15 62 No
Hermetic
Yes
A76_SMA76.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 28 dB (Typ.)
Wide Power Supply Range: +8 to +15 Volts
High Third Order IP: +28 dBm (Typ.)
High Output Level: +15 dBm (Typ.)
15 MACOM_general.png
SMA83-1 询问 Cascadable Amplifier 10 to 250 MHz
10 250 35.5 2.5 9 -2 31 No
Hermetic
Yes
A83-1_SMA83-1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain Two - Stages: 35.5 dB (Typ.)
Low VSWR Over full Control Range: <1.5:1 (Typ.)
Voltage Controlled Gain: 29 dB TO 39 dB @ Vcc = 3 TO 12 Volts
Low Power Drain: 65 mA @ 5 Volts (Typ.)
15 MACOM_general.png
SMA11-2 采购 Cascadable Amplifier 5 to 1000 MHz
5 1000 16 2.5 10 -1 9 No
Hermetic
Yes
A11-2_SMA11-2.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 2.5 dB (Typ.)
High Gain: 16 dB (Typ.)
15 MACOM_general.png
SMA231 采购 Cascadable Amplifier 10 to 250 MHz
10 250 26 1.7 22 10 16 No
Hermetic
Yes
A231_SMA231.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 1.7 dB (Typ.)
Medium Output Level: +14 dBm at +8 Vdc (Typ.)
High Efficiency: 16 mA at +5 Vdc
High Gain: 26.0 dB (Typ.)
5 MACOM_general.png
SMA45-1 询问 Cascadable Amplifier 1000 to 4000 MHz
1000 4000 17.5 4 26 13 65 No
Hermetic
Yes
A45-1_SMA45-1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Wide Bandwidth
GaAs Fet Design
Low Noise: 4.1 dB (Typ.)
High Gain: 17.5 dB (Typ.)
5 MACOM_general.png
SMA1212 采购 Cascadable Amplifier 100 to 1200 MHz
100 1200 14 1.8 29 19 70 No
Hermetic
Yes
A1212_SMA1212_CA1212.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Very Low Noise: 1.8 dB (Typ.)
High Power Added Efficiency: 20%
High Output Power: +19 dBm (Typ.)
5 MACOM_general.png
SMA76-1 采购 Cascadable Amplifier 5 to 500 MHz
5 500 27.5 3 26 13 47 No
Hermetic
Yes
A76-1_SMA76-1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 27.5 dB (Typ.)
Low Noise Figure: 3.0 dB (Typ.)
High Output Level: +12.7 dBm (Typ.)
5 MACOM_general.png
A59 采购 Cascadable Amplifier 5 to 500 MHz
5 500 11.5 4.3 36 22 88 No
Hermetic
Yes
A59_SMA59.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Dynamic Range: +118 DBM (1 MHz Band)
High Output Power: +22 dBm (Typ.)
Wide Power Supply Range: +5 to +15 Volts
Low Noise Figure: 4.3 dB (Typ.)
High Third Order I.P.: +36 dBM (Typ.)
15 MACOM_general.png
A531 采购 Cascadable Amplifier 10 to 500 MHz
10 500 31.7 2 14 3 17 No
Hermetic
Yes
A531_SMA531.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 32 dB (Typ.)
Low VSWR: 1.3:1 (Typ.)
Low Noise Figure: 2.0 dB (Typ.)
High Efficiency: 17 mA at +5 Vdc
Low Power Drain: 85 mW at +5 Vdc
5 MACOM_general.png
A25-1 采购 Cascadable Amplifier 2 to 1500 MHz
2 1500 13.5 3 22 9 25 No
Hermetic
Yes
A25-1_SMA25-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: <3.4 dB
Wide Power Supply Range: +5 to +15 Volts
Low VSWR: <1.7:1
Medium Power Out: +9.0 dBm
15 MACOM_general.png
A45 采购 Cascadable Amplifier 1000 to 4000 MHz
1000 4000 17.5 4 29 20 120 No
Hermetic
Yes
A45_SMA45.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 17.5 dB (Typ.)
GaAs Fet Design
HIgh Output Power: +19.5 dBm (Typ.)
Low Noise: 4.5 dB (Typ.)
15 MACOM_general.png
SMA4011 采购 Cascadable Amplifier 1000 to 4000 MHz
1000 4000 15.5 2 29 18 65 No
Hermetic
Yes
A4011_SMA4011.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 2.0 dB (Typ.)
Phemt Amplifier
Medium Output Power: +18.3 dBm (Typ.)
High Efficiency: 65 mA (TYP.) @ +5 Vdc
5 MACOM_general.png
A76-1 询问 Cascadable Amplifier 5 to 500 MHz
5 500 27.5 3 26 13 47 No
Hermetic
Yes
A76-1_SMA76-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain - Two Stages: 27.5 dB (Typ.)
Low Noise Figure: 3.0 dB (Typ.)
High Output Level: +12.7 dBm (Typ.)
5 MACOM_general.png
A87-1 采购 Cascadable Amplifier 10 to 400 MHz
10 400 16 3.4 31 17 30 No
Hermetic
Yes
A87-1_SMA87-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Output Level: +17 dBm (Typ.)
Wide Power Supply Range: 5 TO 15 Volts
High Third-Order IP: +31 dBm (Typ.)
High Efficiency: 33 mA @ +15 Vdc (Typ.)
15 MACOM_general.png
SMA28-2 采购 Cascadable Amplifier 10 to 1500 MHz
10 1500 14 3.5 24 11 27 No
Hermetic
Yes
A28_SMA28.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 3.5 dB (Typ.)
Low VSWR: <1.4:1 (Typ.)
Good Dynamic Range105 dB (Typ.)
High Efficiency: 27 mA (Typ.) @ +5 Vdc
High Efficiency: 27 mA (Typ.) @ +5 Vdc
5 MACOM_general.png
A81 采购 Cascadable Amplifier 20 to 250 MHz
20 250 25.5 3 28 17 35 No
Hermetic
Yes
A81_SMA81.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation: >30 dB (Typ.)
Low Noise: 2.6 dB (Typ.)
High Level Output: +17 dBm (Typ.)
High Gain: 26 dB (Typ.)
15 MACOM_general.png
CA70-2 询问 Cascadable Amplifier 10 to 250 MHz
10 250 8 2.2 38 19 25 No
Connectorized
No
A70-2_SMA70-2.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 2.2 dB (Typ.)
Low DC Current: 25 mA (Typ.) atT +15 Vdc
High Third Order I.P.: +38 dBm (Typ.)
High Output Power: +19 dBm (Typ.)
15 MACOM_general.png
CPA38 询问 Cascadable Amplifier 200 to 2000 MHz
200 2000 10 4 34 23 150 No
Connectorized
No
PA38.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Wide Bandwidth: 200-2400 MHz (Typ.)
High Third Order I.P.: +34 dBm (Typ.)
Low Noise Figure: 4.0 dB (Typ.)
High Output Level: +23.0 dBm (Typ.)
15 MACOM_general.png
PAW1027 询问 RF Linear Hybrid Amplifier 35 to 350 MHz
35 350 38.5 3.7 43 31 300 No
SOT115J
No
PAW1027.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
M538 - Surfacing Mounting Instructions - Footprint Guidelines
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Ultra High Linearity
Operation Over a Wide Voltage Range
Low Noise Figure: 3.7 dB (Typ.)
High Gain: 38.5 dB (Typ.)
24 Electolytic gold over nickel
blue brick amp.png
CA32-1 询问 Cascadable Amplifier 100 to 2000 MHz
100 2000 11.5 2.5 25 16 44 No
Connectorized
No
A32-1_SMA32-1.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 2.5 dB (Typ.)
GaAs Fet Amplifier
Medium Third Order IP.:+25 dBm (Typ.)
High Output Level: +15.5 dBm (Typ.)
5 MACOM_general.png
AMC-119-SMA 询问 High Performance Amplifier, 8 dB Gain, 30 - 250 MHz
30 250 8 2.5 35 21 50 No
Connectorized
No
AM-119_AMC-119.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
2.3 dB Typical Midband Noise Figure
+40 dBm Typical Midband Third Order Intercept
+23 dBm Typical Midband Output Power
15 MACOM_general.png
AMC-182-SMA 采购 Cascadable Thin Film Amplifier, 28 dB Gain, 5 - 1000 MHz
5 1000 28.2 3.5 20 10 44 No
Connectorized
No
AM-182_AMC-182.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
28.5 dB Typical Gain
2.7 dB Typical Low Noise
15 MACOM_general.png
CA18-1 询问 Cascadable Amplifier 10 to 1000 MHz
10 1000 14.7 3.8 30 16 44 No
Connectorized
No
A18-1_SMA18-1.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Dynamic Range
Low Noise: 3.8 dB (Typ.)
High Third Order I.P.: +30 dBm (Typ.)
High Output Power: +16 dBm (Typ.)
15 MACOM_general.png
CA25-1 询问 Cascadable Amplifier 2 to 1500 MHz
2 1500 13.5 3 22 9 25 No
Connectorized
No
A25-1_SMA25-1.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: <3.4 dB
Wide Power Supply Range: +5 to +15 Volts
Low VSWR: <1.7:1
Medium Power Out: +9.0 dBm
15 MACOM_general.png
MAAM-008317-CA7503 询问 Cascadable Amplifier 10 to 500 MHz
10 500 20.5 1.7 16 3 14 No
Connectorized
No
A75-3_SMA75-3.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 20.5 dB (Typ.)
Low Noise: 1.7 dB (Typ.)
15 MACOM_general.png
AM-147-PIN 采购 Cascadable Amplifier, 10 to 500MHz
10 500 16 4.2 31 19 0.8 No
Hermetic
AM-147_AMC-147.pdf
HIGH POWER OUTPUT: +21 dBm (TYP.)
HIGH THIRD ORDER IP3: +33 dBm (TYP.)
HIGH EFFICIENCY: 52 mA (TYP.) @ +15 Vdc
MAAM-008199-000A51 询问 Cascadable Amplifier 10 to 400 MHz
10 400 15 2.7 10 -4 7 No
Hermetic
Yes
A51_SMA51.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Available in Surface Mount
Flat Bandwidth: ±0.2 dB (Typ.)
Low VSWR <1.3:1 (Typ.)
Low Noise: 2.7 dB (Typ.).
15 MACOM_general.png
SMA31-1 询问 Cascadable Amplifier 100 to 2000 MHz
10 2000 11.5 3.5 9 -2 9 No
Hermetic
Yes
A31-1_SMA31-1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: <3.5 dB (Typ.)
Low VSWR: 1.5:1 (Typ.)
15 MACOM_general.png
SMPA38 询问 Cascadable Amplifier 200 to 2000 MHz
200 2000 10 4 34 23 150 No
Hermetic
Yes
SMPA38.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Wide Bandwidth: 200-2400 MHz (Typ.)
High Third Order I.P.: +34 dBm (Typ.)
High Output Level: +23.0 dBm (Typ.)
Low Noise Figure: 4.0 dB (Typ.)
15 MACOM_general.png
SMA25-1 询问 Cascadable Amplifier 2 to 1500 MHz
2 1500 13.5 3 22 9 25 No
Hermetic
Yes
A25-1_SMA25-1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: <3.4 dB
Wide Power Supply Range: +5 to +15 Volts
Low VSWR: <1.7:1
Medium Power Out: +9.0 dBm
15 MACOM_general.png
SMA18-1 询问 Cascadable Amplifier 10 to 1000 MHz Rev. V3
10 1000 14.7 3.8 30 16 44 No
Hermetic
Yes
A18-1_SMA18-1.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Dynamic Range
Low Noise: 3.8 dB (Typ.)
High Third Order I.P.: +30 dBm (Typ.)
High Output Power: +16 dBm (Typ.)
15 MACOM_general.png
SMA180 采购 Cascadable Amplifier 10 to 500 MHz
10 500 16.5 3.4 33 18 63 No
Hermetic
Yes
A180_SMA180.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation: 22 dB (Typ.)
High Output Power: +18 dBm (Typ.)
15 MACOM_general.png
SMA12 询问 Cascadable Amplifier 10 to 1000 MHz
10 1000 16 2.8 22 8 22 No
Hermetic
Yes
A12_SMA12.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 2.8 dB (Typ.)
Low VSWR: <1.6:1 (Typ.)
Medium Output Power: +8 dBm (Typ.)
High Gain: 16.0 dB (Typ.)
15 MACOM_general.png
A83-1 采购 Cascadable Amplifier 10 to 250 MHz
10 250 35.5 2.5 9 -2 31 No
Hermetic
Yes
A83-1_SMA83-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain-Two Stages: 35.5 dB (Typ.)
Low VSWR Over Full Control Range: <1.5:1 (Typ.)
Voltage Controlled Gain: 29 dB TO 39 dB @ Vcc = 3 TO 12 Volts
Low Power Drain: 65 mA @ 5 Volts (Typ.)
15 MACOM_general.png
SMA53 询问 Cascadable Amplifier 10 to 500 MHz
10 500 15 3 16 4 12 No
Hermetic
Yes
A53_SMA53.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Available in Surface Mount
Medium Gain: 15 dB (Typ.)
Medium Third Order I.P.: +16 dBm (Typ.)
Low Noise: 3.0 dB (Type.)
15 MACOM_general.png
SMA67 询问 Cascadable Amplifier 10 to 800 MHz
10 800 14 4 30 16 32 No
Hermetic
Yes
A67_SMA67.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Available in Surface Mount
High Efficiency: +16 dBm (Typ.) Output Power at 32 mA (Typ.)
Low Noise Figure: <4.0 dB (Typ.)
Wide Power Supply Range: +5 to +15 Volts
15 MACOM_general.png
SMA63 询问 Cascadable Amplifier 5 to 1000 MHz
5 1000 16 3 15 4 14 No
Hermetic
Yes
A63_SMA63.pdf
AN3009 - S-Parameter S2P File Format Guide
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 3.0 dB (Typ.)
High Gain: 16 dB (Typ.)
Medium Third Order I.P.: +15 dBm (Typ.)
15 MACOM_general.png
A81-3 询问 Cascadable Amplifier 20 to 500 MHz
20 500 17 4 20 8 29 No
Hermetic
Yes
A81-3_SMA81-3.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation: >35 dBm (TYP.)
Medium Output Level: +8.0 dBm (TYP.)
Low Noise: 3.6 dB (TYP.)
Exception Output VSWR: 1.1:1 (TYP.)
15 MACOM_general.png
MAAM-007272-0CA514 询问 Cascadable Amplifier 10 to 500 MHz
5 500 28 4 32 19 96 No
Connectorized
No
A514_SMA514.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 28 dB (Typ.)
High Output Power: +19 dBm (Typ.)
Low Noise: 4.0 dB (Typ.)
15 MACOM_general.png
MAAM-008198-0CA162 询问 Cascadable Amplifier 10 to 1200 MHz
10 1200 13 3.5 18 6 15 No
Connectorized
No
MAAM-008198-00A162.pdf
AN3009 - S-Parameter S2P File Format Guide
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 3.5 dB (Typ.)
Low VSWR: <1.5:1 (Typ.)
Good Dynamic Range: 102.5 dB (Typ.) in 1 MHz BW
High Efficiency: 15 mA (Typ.) @ +5 Volts
5 MACOM_general.png
A81-2 采购 Cascadable Amplifier 20 to 500 MHz
20 500 24.5 3 28 15 29 No
Hermetic
Yes
A81-2_SMA81-2.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Power Output: +15.0 dBm (Typ.)
High Gain: >24.5 dB (Typ.)
Low Noise: 2.9 dB (Typ.)
High Efficiency: 29 mA @ +15 Vdc (Typ.)
15 MACOM_general.png
A63 询问 Cascadable Amplifier 5 to 1000 MHz
5 1000 16 3 15 4 14 No
Hermetic
Yes
A63_SMA63.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 3.0 dB (Typ.)
High Gain: 16 dB (Typ.)
Medium Third Order I.P.: +15 dBm (Typ.)
15 MACOM_general.png
A74-1 询问 Cascadable Amplifier 5 to 250 MHz
5 250 31 4.5 21 9 40 No
Hermetic
Yes
A74-1_SMA74-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain-Two Stages: 31 dB (Typ.)
Low VSWR: <1.3:1 (Typ.)
Wide Power Supply Range: +8 to +15 Volts
Medium Output Level: +8.5 dBm (Typ.)
15 MACOM_general.png
A33 询问 Cascadable Amplifier 10 to 2000 MHz
10 2000 9.5 4.5 15 3 14 No
Hermetic
Yes
A33_SMA33.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 4.5 dB (Typ.)
Available in Surface Mount
Wide Power Supply Range: +8 to +15 Volts
+3 dBm Output Level (Typ.)
15 MACOM_general.png
A411 询问 Cascadable Amplifier 10 to 400 MHz
10 400 15.8 3 24 10 16 No
Hermetic
Yes
A411_SMA411.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise Figure: 3.0 dB (Typ.)
Medium Output Level::+14.5 dBm at +8 Vdc (Typ.)
High Third Order I.P.: +29 dBm at +8 Vdc (Typ.)
HIgh Efficiency: 16 mA at +5 Vdc
5 MACOM_general.png
A70-2 采购 Cascadable Amplifier 10 to 250 MHz
10 250 8 2.2 38 19 25 No
Hermetic
Yes
A70-2_SMA70-2.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: 2.2 dB (Typ.)
Low DC Current: 25 mA (Typ.) at +15 Vdc
High third Order I.P.: +38 dBm (Typ.)
High Output Power: +19 dBm (Typ.)
15 MACOM_general.png
A71 询问 Cascadable Amplifier 5 to 200 MHz
5 200 18 2.1 10 -3 9 No
Hermetic
Yes
A71_SMA71.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Available in Surface Mount
Low VSWR: <1.4:1 (Typ.)
High Gain:18 dB (Typ.)
Low Noise: 2.1 dB (Typ.)
15 MACOM_general.png
A53 询问 Cascadable Amplifier 10 to 500 MHz
10 500 15 3 16 4 12 No
Hermetic
Yes
A53_SMA53.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Available in Surface Mount
Medium Gain: 15.0 dB (Typ.)
Low Noise: 3.0 dB (Typ.)
Medium Third Order I.P.: +16 dBm (Typ.)
15 MACOM_general.png
A511 采购 Cascadable Amplifier 10 to 500 MHz
10 500 17 3.4 33 21 52 No
Hermetic
Yes
A511_SMA511.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Power Output: +21 dBm (Typ.)
Available in Both TO-8 and SMTO-8 Packages
High Efficiency: 52 mA (Typ.) @ +15 Vdc
High Third Order IP3: +33 dBm (Typ.)
15 MACOM_general.png
A514 询问 Cascadable Amplifier 10 to 500 MHz
5 500 28 4 32 19 96 No
Hermetic
Yes
A514_SMA514.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Gain: 28 dB (Typ.)
High Output Power: +19 dBm (Typ.)
Low Noise: 4.0 dB (Typ.)
15 MACOM_general.png
A1211 采购 Cascadable Amplifier 10 to 1200 MHz
10 1200 14 2.8 20 6 16 No
Hermetic
Yes
A1211_SMA1211.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Efficiency: 16 mA at +5 Vdc
Medium Third I.P.: +25 dBm at 8 Vdc
Medium Output Power: +11 dBm at 8 Vdc (Typ.)
Low Current Drain: 15.5 mA at 5 Vdc
Low Noise Figure: 2.8 dB at 5 Vdc (Typ.)
5 MACOM_general.png
A21-1 询问 Cascadable Amplifier 10 to 1200 MHz
5 1200 15.5 2.4 11 -1 10 No
Hermetic
Yes
A21-1_SMA21-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: <2.8 dB (Typ.)
High Single Stage Gain: 15dB (Typ.)
Low VSWR:<1.5:1 (Typ.)
15 MACOM_general.png
A180 询问 Cascadable Amplifier 10 to 500 MHz
10 500 16.5 3.4 33 18 63 No
Hermetic
Yes
A180_SMA180.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
High Reverse Isolation: 22 dB (Typ.)
High Output Power: +18 dBm (Typ.)
15 MACOM_general.png
A31-1 采购 Cascadable Amplifier 100 to 2000 MHz
10 2000 11.5 3.5 9 -2 9 No
Hermetic
Yes
A31-1_SMA31-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Low Noise: <3.5 dB (Typ.)
Low VSWR: 1.5:1 (Typ.)
15 MACOM_general.png
PAW1027-1 询问 RF Linear Hybrid Amplifier 35 to 350 MHz
35 500 38 4.2 43 31 300 No
SOT115J
No
PAW1027-1.pdf
AN3009 - S-Parameter S2P File Format Guide
M513 - Tape and Reel Packaging for Surface Mount Components
M538 - Surfacing Mounting Instructions - Footprint Guidelines
S2080 - Moisture Effects on the Soldering of Plastic Encapsulated Devices
AN215a - RF Small Signal Design Using Two-Port Parameters (supplied with the permission of Motorola)
Ultra High Linearity
Operation Over a Wide Voltage Range
Low Noise Figure: 4.5 dB (Typ.)
High Gain: 38 dB (Typ.)
24 Electolytic gold over nickel
blue brick amp.png