交叉点开关、信号调理器/转接驱动器

image-from-the-document-manager

MACOM公司提供业界极为广泛的交叉点开关器件组合,这些器件的通道数从2x2一直到288x288,数据传输速率范围为3.2 Gbps到12.8 Gbps甚至更高。我们的器件采用信号调理技术,支持系统设计人员选用低成本电路板和元件,同时提高设计余量。

凭借MACOM公司广泛的与协议无关的交叉点产品组合,我们可提供适用于各种应用(包括视频广播路由器和交换机、HDMI切换器和DWDM物理层路由器等)中切换高数据率信号的解决方案。

搜索历史
最近浏览的产品
  • 未找到最新产品!

条件搜索

部件号 订货 开关矩阵 最大数据速率(Gbps) Package Size 封装类型 电源电压 I/O Voltage (V) 通道数量 嵌入CDR Embedded SerDes 描述 ADS & SPICE模型信息 应用笔记 优势 Brightcove视频 兼容部件 目录 数据手册封装概述 硬件手册 设备固件 ESD EVM GUI软件 EVM用户手册 EVM/Reference Design Guides 特性 Last Time Buys 引线精加工 MSL 标志 模型数据(Sparameters) 外形图 用户通知 Power Consumption (W) 产品介绍 产品公告 产品照片 质量报告 RoHS/IPC报告
 
M21123 询问 18x6 to 12x12 to 1x23 (Reconfigurable)
3.2 12x12mm
88pinQFN
1.2
1.2/1.8/2.5/3.3
23
No
No
询问 630740A.pdf
MACOM_general.png
M21123G-11_IPC-1752-2_v11a_ASEM.pdf
M21170 询问 288x288
3.2 50x50mm
2389-pin BGA
1.2
1.2, 1.8, 2.5
288
No
No
询问 M21170-BRF-001-A.pdf
MACOM_general.png
M21170G-12_IPC-1752-2_v1-1a_ASEK.pdf
M21121 询问 34x34
3.2 34x34mm
404pinPBGA
2.5,3.3
34
No
No
211x1-APP-001-A - SMT Lead-Free Packages Application Note Products Affected: M21111, M21121
询问 Low power consumption of 3.5 Watts
RoHS package option
Smart Power™ for lower power consumption
Data rates range from 0 to 3.2 Gbps
Built-in test feature: PRBS Tx/Rx
Input Equalizer to reduce deterministic jitter
2xxxx-PCN-007-A.pdf
CN-102810-21XXX-Test.pdf
CN-021010.pdf
21111-BRF-001-D.pdf
Macom gen.png
M21121-11_IPC-1752-2_v1-02.pdf
M21121G-11_IPC-1752-2_v1-02.pdf
M21151 询问 144x144
3.2 35x35mm
1156terminalBGA
1.2
1.2/1.5/1.8/2.5
144
Yes
No
Highest Performance, Lowest Power Crosspoint Switch Reduces
211xx-APP-006-A - SMT BGA (Ball Grid Array) Eutectic Solder Balls Application Note Products Affected: M21131, M21131V, M21136, M21141G4, M21141G5, M21151, M21151V, M21156, M21161G4, M21161G5
211x1-DSH-001-I.pdf
Built-in system test features such as JitterMeter™ and PRBS Tx/Rx
Programmable output pre-emphasis for driving long board traces and cables
Input signal activity monitoring
Low-power consumption of 12 W
PowerScaler for further power reduction based on system needs
Programmable input equalizer to reduce deterministic jitter (ISI), caused by board traces and cables
Supports any data rate from 0 to 3.2 Gbps
2XXXX-PCN-004-A.pdf
CN-102910-211XX-Test.pdf
211XX-Ship-PCN-052110.pdf
211XX-CPCore-PCN-043010.pdf
211XX_CPCore_PCN_071210.pdf
21131-BRF-001-C.pdf
211xx-PBD-004-A.pdf
29320-PBD-002-A.pdf
Macom gen.png
M21151-13_IPC-1752-2_v1-02_RoHS5.pdf
m21151g-71_ipc-1752-2_v1-02.pdf
M21151G-33_IPC-1752-2_v11a_ASEK.pdf
m21151g-33_ipc-1752-2_v1-02.pdf
M21151G-24_IPC-1752-2_v1-1a_ASEK.pdf
M21151G-23_IPC-1752-2_v1-1a_ASEK.pdf
M21151G-14_IPC-1752-2_v11a_ASEK.pdf
m21151g-14_ipc-1752-2_v1-02.pdf
M21151G-13_IPC-1752-2_v11a_ASEK.pdf
m21151g-13_ipc-1752-2_v1-02.pdf
M21151-23_IPC-1752-2_v11a_ASEK_.pdf
M21151-23_IPC-1752-2_v11a_ASEK.pdf
M21151-14_IPC-1752-2_v1-1a_ASE.pdf
M21131 询问 72x72
3.2 35x35mm
1156terminalBGA
1.2
1.2/1.5/1.8/2.5
72
Yes
No
low-power CMOS, high-speed 72x72 crosspoint switch with robust signal
211xx-APP-006-A - SMT BGA (Ball Grid Array) Eutectic Solder Balls Application Note Products Affected: M21131, M21131V, M21136, M21141G4, M21141G5, M21151, M21151V, M21156, M21161G4, M21161G5
211x1-DSH-001-I.pdf
2XXXX-PCN-004-A.pdf
CN-102910-211XX-Test.pdf
211XX-Ship-PCN-052110.pdf
211XX-CPCore-PCN-043010.pdf
211XX_CPCore_PCN_071210.pdf
21131-BRF-001-C.pdf
211xx-PBD-004-A.pdf
29320-PBD-002-A.pdf
Macom gen.png
M21131-12_IPC-1752-2_v1-02_RoHS5.pdf
M21131G-32_IPC-1752-2_v11a_ASEK.pdf
M21131G-32_IPC-1752-2_v1-02.pdf
M21131G-23_IPC-1752-2_v11a_ASEK.pdf
M21131G-23_IPC-1752-2_v1-1a_ASEK-1.pdf
M21131G-22_IPC-1752-2_v11a_ASEK.pdf
M21131G-13_IPC-1752-2_v11a_ASEK.pdf
M21131G-13_IPC-1752-2_v1-1a.pdf
M21131G-12_IPC-1752-2_v11a_ASEK.pdf
M21131G-12_IPC-1752-2_v1-02.pdf
M21131-32_IPC-1752-2_v1-02_RoHS5.pdf
M21131-22_IPC-1752-2_v11a_ASEK_.pdf
M21131-22_IPC-1752-2_v11a_ASEK.pdf
M21163 询问 9x24 to 16x16 to 1x31 (reconfigurable)
3.2 17x17mm
252pinBGA
1.2
1.2/1.8/2.5/3.3
31
No
No
询问 8 fixed outputs and 24 reconfigurable IOs
Industrial Operation Temperature range of -40°C to 85°C
Standard 2-wire and 4-wire serial digital interface
Loss of Signal detection at the input
Integrated 50O input and output termination
DC and AC coupling at the input and output with integrated level shifter
Very low power operation (65 mW per channel @1.2V)
Per port individual powerdown control
Per port individually programmable output swing control
Per port individually programmable input equalization and output de-emphasis
M21163_Product_Brief.pdf
MACOM_general.png
M21163G-11_IPC-1752-2_v11a_ASEM.pdf
M21125 询问 40x40
3.8 35x35mm
676ballsTEPBGA
2.5/3.3
-
40
No
No
询问 21125-EVMD-001-B.pdf
Protocol agnostic up to 3.8Gb/s
Junction temperature sensor
JTAG boundary scan
I2C or hardwired pins control
Serial and parallel programming modes
Electrical bus idle transparent
2.5V to 3.3V power supply operation
Loss of Signal (LOS) alarm
Programmable output de-emphasis
Programmable per lane input equalization
Common Footprint for M21115
40x40 Non-blocking crosspoint switch
Extended temperature operation: -40°C to +85°C
CN-042011A-1.pdf
M21115-BRF-001-C.pdf
MACOM_general.png
M21115G-12_IPC-1752-2_v1-1a_Amkor-1.pdf
M21125G-12_IPC-1752-2_v1-1a_Amkor.pdf
M21171 询问 288x200
3.2 50x50mm
2389pinBGA
1.2
1.2 (output), 1.2/1.8/2.5 (input)
200
No
No
3.2G 288x200 Crosspoint
询问 Non-square, fully non-blocking matrix array
JTAG boundary scan
Electrically independent input and output supply voltage rails for increased flexibility
DC and AC coupling support at input/output
1.2 V core, 1.2 V output, and optional 1.2 V/1.8 V/2.5 V input supply voltages
Flexible configuration through standard 2-wire and 4-wire serial interfaces, as well as parallel interface
Loss of signal alarm per input
Support for multiple switch points
Individual input termination control (High-Z or 50 O)
Global or individual programmable output swing level
Global or individual programmable input equalization and output deemphasis
Protocol agnostic
MACOM_general.png
M21115 询问 20x20
3.8 35x35mm
676ballsTEPBGA
2.5/3.3
-
20
No
No
询问 21125-EVMD-001-B.pdf
Protocol agnostic up to 3.8Gb/s
Extended temperature operation: -40°C to +85°C
Junction temperature sensor
JTAG boundary scan
I2C or hardwired pins control
Serial and parallel programming modes
Electrical bus idle transparent
2.5V to 3.3V power supply operation
Programmable output de-emphasis
Programmable per lane input equalization
Common footprint as M21125
20x20 Non-blocking crosspoint switch
Loss of Signal (LOS) alarm
CN-042011A-1.pdf
M21115-BRF-001-C.pdf
Macom gen.png
M21172 询问 200x288
3.2 50x50mm
2389pinBGA
1.2
1.2 (output), 1.2/1.8/2.5 (input)
288
No
No
3.2G 200x288 Crosspoint
询问 Non-square, fully non-blocking matrix array
Electrically independent input and output supply voltage rails for increased flexibility
DC and AC coupling support at input/output
1.2 V core, 1.2 V output, and optional 1.2 V/1.8 V/2.5 V input supply voltages
Flexible configuration through standard 2-wire and 4-wire serial interfaces, as well as parallel interface
Loss of signal alarm per input
Support for multiple switch points
Individual input termination control (High-Z or 50 O)
Global or individual programmable output swing level
Global or individual programmable input equalization and output deemphasis
Protocol agnostic
JTAG boundary scan
MACOM_general.png
M21080 询问 80x80
12.5 45x45mm
FCBGA Package
1.8
1.8
80
12.5 Gbps 80x80 Crosspoint Switches
M21605_M21601_M21080.pdf
80x80 non-blocking array crosspoint switch with low power dissipation
Four integrated temperature sensors with programmable alarm
JTAG boundary scan
1.8, 2.5, and 3.3 V digital core voltages
1.8 V core and high-speed I/O voltage
Auxiliary high-speed input and output for monitoring and testing
Flexible configuration through standard 2-wire serial, 4-wire serial interfaces or 8-bit parallel interface
Individual lane LOS (Loss Of Signal) detection and squelch
Programmable output post tap de-emphasis up to 12 dB total and 5 dB total of pre-tap de-emphasis
Programmable input equalization to compensate for up to 27 dB of loss at 6.25 GHz
Low latency, less than 2 ns
M21043 询问 3.2 7 mm x 7 mm, 48-pin, QFN package
7 mm x 7 mm, 48-pin, QFN package
1.2
2.5
3.2 Gbps 8 Port Reconfigurable Non-Blocking Crosspoint Switch
询问 Reconfigurable IOs allowing for non-square matrix sizes
Hardware pin mode for use as 4 x 4 crosspoint
Standard 2-wire and 4-wire serial digital interface
Loss of signal detection at the input
Integrated 50 ? input and output termination
DC and AC-coupling at the input and output with integrated level shifter
Very low power operation (55 mW per channel @1.2 V typical)
Per port individual power down control
Per port individually programmable output swing control
Per port individually programmable input equalization and output de-emphasis
Industrial operating temperature range of -40 °C to 85 °C
M21440 询问 8x8
10.3 12x12mm
88pinQFN
1.2
1.2-1.8
8
Yes
Yes
M21440_M21441.pdf
Data rates from 1.0625 to 10.3125 Gbps
Single 1.2 V supply option
Up to 12 dB of post-cursor de-emphasis, 4 dB pre-cursor de-emphasis
Up to 27 dB of programmable/adaptive input equalization
Post-equalization eye monitors
Auto-rate detecting CDRs
Integrated PRBS pattern generator/checker
Individual channel LOS (Loss Of Signal) detection and squelch
8x8/12x12 non-blocking crosspoint switch
Support for proprietary data rates
Electrical idle pass-through
4.3
M21441-14P_IPC-1752-2_v11a_AmkorK.pdf
M21441G-15_IPC-1752-2_v11a_AmkorK_au.pdf
M21441G-13P_IPC-1752-2_v11a_AMK_au.pdf
M21462 询问 8x8
6.2 10x10mm
72pinQFN
1.2
1.2-1.8
8
Yes
No
21462-DSH-001-D.pdf
1.7
M21462G-11P_IPC-1752-2_v1-1a_Amkor.pdf
M21462G-15_IPC-1752-2_v11a_AmkorK.pdf
M21462G-12P_IPC-1752-2_v1-1a_Amkor.pdf
M21030 询问 4x4
6.5 6x6mm
40pinQFN
1.2
1.2-1.8
4
No
No
21XXX-APP-006 - Comparison Between M21450G, M21451G and M21030G Variants for PCI Express and SAS/ SATA Applications 21xxx-APP-006-A
21030-DSH-001-J.pdf
21030-EVMD-001.pdf
Four Fully Independent, Adaptive Equalizers
Data Rate Independent
Extended Temp Range (-40° to 85° C)
1.2 Volt Core / Optional 1.2,1.8 or 2.5 Volt IO
Protocol Agnostic
Out of Band Signaling Support
Small 6 x 6 mm QFN package
Low 550 mW Power usage
40 dB+ Equalization and 6 dB of De-Emphasis Available
CN-042011A-1.pdf
0.58
21030-BRF-001-C.pdf
21XXX-PBD-005 - M21030-14, M21450-14, and M21451-14 Product Revision and Replacement Product Bulletin
M21030G-14_IPC-1752-2_v1-1a_ASEM.pdf
M21030G-16_IPC-1752-2_v11a_ASEM.pdf
M21441 询问 12x12
10.3 19x19mm
324pinBGA
1.2
1.2-1.8
12
Yes
Yes
10.3125 12x12 Crosspoint
M21440_M21441.pdf
Data rates from 1.0625 to 10.3125 Gbps
Electrical idle pass-through
Up to 12 dB of post-cursor de-emphasis, 4 dB pre-cursor de-emphasis
Up to 27 dB of programmable/adaptive input equalization
Post-equalization eye monitors
Auto-rate detecting CDRs
Integrated PRBS pattern generator/checker
Individual channel LOS (Loss Of Signal) detection and squelch
8x8/12x12 non-blocking crosspoint switch
Support for proprietary data rates
Single 1.2 V supply option
6.4
M21463 询问 12x12
6.2 12x12mm
88pinQFN
1.2
1.2-1.8
12
Yes
No
询问 2.5
M21463G-12P_IPC-1752-2_v1-02_Amkor.pdf
M21463G-15_IPC-1752-2_v11a_AmkorK.pdf
M21156 询问 144x144
3.2 35x35mm
1156terminal
1.2
1.2/1.5/1.8/2.5
144
No
No
211xx-APP-006-A - SMT BGA (Ball Grid Array) Eutectic Solder Balls Application Note Products Affected: M21131, M21131V, M21136, M21141G4, M21141G5, M21151, M21151V, M21156, M21161G4, M21161G5
询问 Most highly integrated, highest performance crosspoint switch reduces system cost and complexity
Programmable input equalization with CDR for random and deterministic jitter reduction
Supports SONET, GbE, 10GbE, Fibre Channel (1x, 2x, 10x) and Infiniband applications
Built-in system test features such as JitterMeter™ and PRBS Tx/Rx
PowerScaler™ for further power reduction based on system needs
Low power consumption of 18 W, nearly 60% power savings compared to an equivalent circuit with external CDRs
CDR performance exceeding SONET requirements with 0.65 UI jitter tolerance and 1.5 mUI (rms) jitter generation
Programmable output pre-emphasis for driving long board traces and cables
Programmable input equalizer to remove deterministic jitter (ISI), caused by board traces and cables
Integrated per-channel multi-rate CDRs, with bit rates of 1.0-3.2 Gbps
2XXXX-PCN-004-A.pdf
CN-102910-211XX-Test.pdf
21156-CPCore-PCN-021610b.pdf
211XX-Ship-PCN-052110.pdf
20.1
21156-BRF-001-A.pdf
211xx-PBD-004-A.pdf
29320-PBD-002-A.pdf
612635A.jpg
m21156-13_ipc-1752-2_v1-02_rohs5.pdf
M21156G-23_IPC-1752-2_v1-1a_ASEK-2.pdf
m21156g-23_ipc-1752-2_v1-1a_asek-1.pdf
M21156G-13_IPC-1752-2_v11a_ASEK.pdf
M21156G-13_IPC-1752-2_v1-02.pdf
M21156-23_IPC-1752-2_v11a_ASEK_.pdf
M21156-23_IPC-1752-2_v11a_ASEK.pdf
M20001 询问 2x2
12.5 3x3mm
QFN
3.3
No
2
No
No
high bandwidth, low power, dual differential single pole, double throw switch.
询问 Two differential, single pole, double throw switches
Industrial temp range -40 to 85 °C
3.3 V supply voltage, no additional regulation needed
3 x 3 mm, 16-pin QFN package
Superior crosstalk isolation
Very low power consumption
6 GHz, 3 dB bandwidth
Low insertion loss
M20001-BRF-001-A.pdf
MACOM_general.png
M21004 询问 2x2
3.2 4x4mm
24pinQFN
1.2
1.2/1.8/2.5/3.3
2
No
No
a very low power, highly integrated, dual channel, backplane equalizer
询问 MACOM_general.png
M21004G-12_IPC-1752-2_v1-02_Amkor.pdf
M21004G-12P_IPC-1752-2_v1-1a_AmkorK.pdf
M21147 询问 80x80
6.5 35x35mm
1156pinFCBGA
1.2
1.2/1.8
80
No
No
asynchronous non-blocking crosspoint switch.
211xx7-APP-001 - M21147/M21167 Crosspoint Switches Application Note
211xx7-APP-002 - M21147/M21167 PCB Design Guidelines Application Note 211x7-APP-002
211x7-DSH-001-C.pdf
80x80 non-blocking array crosspoint switch
JTAG boundary scan
1.2 V core and optional 1.2 V/1.8 V Output supply voltages
Flexible configuration through standard 2-wire and 4-wire serial interfaces, as well as parallel interface
Individual lane LOS (Loss Of Signal) detection and squelch
Individual or globally programmable output de-emphasis up to 12 dB
Individual or globally programmable input equalization up to 23 dB
Low power dissipation
MACOM_general.png
M21147G-11_IPC-1752-2_v11a_ASEK.pdf
M21048 询问 48 x 48
12.5 27 x 27mm
BGA
1.2
I No-O 1.2- 1.8
48
No
No
210xx-APP-001 - Migration Path from M23636/M21148 6.5 Gbps to M21036/M21048 11.5 Gbps Crosspoint Switches Application Note
M21024_M21036_M21048.pdf
210xx-EVMD-002 - M21048/M21024 Evaluation Module User Guide
48 x 48 non-blocking crosspoint switch
Electrical Idle (EI pass-through for PCIe, SAS, and SATA signaling support)
Individual lane LOS (Loss Of Signal) detection and squelch
Programmable output de-emphasis up to 10.5 dB
Jitter measurement tool
Integrated Pattern Generator & Checker
Data rates from 100 Mbps to 12.5 G
Enables channels up to 40" at 12.5 G data rate
210XX-PBD-003.pdf
MACOM_general.png
M21048G-11P_IPC-1752-2_v11a_ASEK.pdf
M21048G-12_IPC-1752-2_v11a_ASEK.pdf
M21450 询问 2x2
6.5 6x6mm
40pinQFN
1.2
1.2-1.8
2
No
No
a dual channel device designed to enable the transmission of multi gigabit serial data through the most challenging environments.
21XXX-APP-006 - Comparison Between M21450G, M21451G and M21030G Variants for PCI Express and SAS/ SATA Applications 21xxx-APP-006-A
21030-APP-001 - Performance vs Data Rate and Backplane/Cable Length for the M21030, M21450 and M21451
21450-DSH-001-L.pdf
21450-EVMD-001 - M21450 EVM User Guide
Adaptive Equalization for up to 40" of FR-4 PCB trace at 6.25 Gbps
Software configurable 2x2 Crosspoint Switch Matrix
Extended operating case temperature range (-20°C to 85°C)
6x6 mm, 40 pin MLF package
HW, SW, AND EEPROM programmable
Up to 40 dB of input equalization and 6 dB of output de-emphasis
Low power dissipation: 140 mW per channel, 280 mW total power at 1.2V
Dual channel adaptive equalizer for data rates up to 6.5 Gbps
Supports electrical idle signaling for PCIe and OOB signaling for SATA/ SAS
CN-042011A-1.pdf
21450-BRF-001-C.pdf
21450-PBD-001-A.pdf
21XXX-PBD-005 - M21030-14, M21450-14, and M21451-14 Product Revision and Replacement Product Bulletin
MACOM_general.png
M21450G-13_IPC-1752-2_v1-1a_Amkor.pdf
M21450G-16P_IPC-1752-2_v1-1a_ASEM.pdf
M21450G-15_IPC-1752-2_v11a_ASEM_au.pdf
M21450G-15_IPC-1752-2_v1-1a_ASEM.pdf
M21450G-14_IPC-1752-2_v11a_ASEM_au.pdf
M21450G-14_IPC-1752-2_v1-1a_ASEM.pdf
M21148 询问 48x48
6.5 27x27mm
676pinBGA
1.2
I No-O 1.2- 1.8
48
No
No
asynchronous fully non-blocking crosspoint switch operating at data rates up to 6.5 Gbps.
M23636-M21148-M21036-M21048 CROSSPOINT APPLICATION NOTE.pdf
M21148_M23636.pdf
D00235 - M21148 Evaluation Module User Guide 21148-EVMD-001
21148-EVMD-001-A.pdf
2XXXX-PBD-001 - M21148/M23636 Crosspoint Switch - Final Test Improvement Product Bulletin 2xxxx-PBD-001
D00210 - M21124/M21148 Product Bulletin 211xx-PBD-009-A
D00257 - M21124/M21148 Product Bulletin 211xx-PBD-010
211XX-PBD-011 - M23636/M21148 Product Bulletin 211xx-PBD-011
MACOM_general.png
M21148G-14_IPC-1752-2_v1-1a_ASEK.pdf
M21148G-14_IPC-1752-2_v1-1a_ASEK.pdf
M21036 询问 36 x 36
12.5 23 x 23mm
BGA
1.2
I No-O 1.2 - 1.8
36
No
No
fully non-blocking asynchronous crosspoint switches that operate at all data rates from 100 Mbps to 12.5 G
210xx-APP-001 - Migration Path from M23636/M21148 6.5 Gbps to M21036/M21048 11.5 Gbps Crosspoint Switches Application Note
M21024_M21036_M21048.pdf
36 x 36 non-blocking crosspoint switch
Electrical Idle (EI pass-through for PCIe, SAS, and SATA signaling support)
Individual lane LOS (Loss Of Signal) detection and squelch
Programmable output de-emphasis up to 10.5 dB
Jitter measurement tool
Integrated Pattern Generator & Checker
Data rates from 100 Mbps to 12.5 G
Enables channels up to 40" at 12.5 G data rate
210XX-PBD-003.pdf
MACOM_general.png
M21036G-11P_IPC-1752-2_v11a_ASEK.pdf
M21036G-12_IPC-1752-2_v11a_ASEK.pdf
M21165 询问 160x160
6.5 35x35mm
1936pinFCBGA
1.2
1.2/1.8
160
No
No
160x160 asynchronous fully non-blocking crosspoint switch operating at data rates up to 6.5 Gbps.
21165-APP-001.pdf
21605-APP-002 - Migration Path from M21165/67 (6.5 Gbps) to M21605 (12.8 Gbps) Crosspoint Switch Application Note 21605-APP-002
21165-APP-001 - M21165 Thermal Application Note 21165-APP-001-A
D00199 - M21145/M21165 PCB Design Guidelines Application Note 211x5-APP-001-A
211x5-DSH-001-E.pdf
D00236 - M21165 Evaluation Module User Guide 21165-EVMD-001
160x160 non-blocking array crosspoint switch
Extended temperature operation: 0°C to 85°C
JTAG boundary scan
Individual level loss of signal (LOS) alarm and squelch
Low power consumption
1.2V core power supply operation / 1.2 or 1.8 or 2.5V IO optional
2-wire I2C, 4-wire SPI, and 8-bit data parallel interface registers
Support for video pathological patterns
Protocol agnostic
Programmable output de-emphasis to 6db
Programmable per lane input equalization
M211x5-BRF-001-E.pdf
D00239 - M21145/M21165 Product Bulletin 211x5-PBD-003
MACOM_general.png
M21165-11_IPC-1752-2_v11a_ASEK.pdf
m21165g-11p_ipc-1752-2_v1.02.pdf
M21165G-11_IPC-1752-2_v11a_ASEK.pdf
M21451 询问 4x4
6.5 6x6mm
40pinQFN
1.2
1.2-1.8
4
No
No
four channel 6.5 Gbps backplane signal conditioner
21XXX-APP-006 - Comparison Between M21450G, M21451G and M21030G Variants for PCI Express and SAS/ SATA Applications 21xxx-APP-006-A
21030-APP-001 - Performance vs Data Rate and Backplane/Cable Length for the M21030, M21450 and M21451
21451-DSH-001-I.pdf
21451-EVMD-001.pdf
21451-EVMD-001 - M21451/M21351 EVM User Guide
Fully non-blocking switch matrices
Data rate independent
Extended temperature range (-40° to 85° C)
1.2 Volt core / optional 1.2, 1.8 or 2.5 Volt IO
Protocol agnostic
Out of band signaling support
Small QFN packages
Low 120 mW per channel power usage
24 dB equalization and 6 dB of de-emphasis available
CN-042011A-1.pdf
M2145x-BRF-001-D.pdf
21XXX-PBD-005 - M21030-14, M21450-14, and M21451-14 Product Revision and Replacement Product Bulletin
MACOM_general.png
M21451G-13_IPC-1752-2_v1-02.pdf
M21451G-16_IPC-1752-2_v11a_ASEM.pdf
M21451G-14_IPC-1752-2_v11a_ASEM.pdf
M21451G-14_IPC-1752-2_v1-1a_ASEM.pdf
M21167 询问 160x160
6.5 35x35mm
1936pinFCBGA
1.2
1.2/1.8
160
No
No
a high-performance 160x160, asynchronous non-blocking crosspoint switch
211xx7-APP-001 - M21147/M21167 Crosspoint Switches Application Note
21605-APP-003 - M21605 Input EQ Settings Application Note 21605-APP-003
21605-APP-002 - Migration Path from M21165/67 (6.5 Gbps) to M21605 (12.8 Gbps) Crosspoint Switch Application Note 21605-APP-002
211xx7-APP-002 - M21147/M21167 PCB Design Guidelines Application Note 211x7-APP-002
21165-APP-001.pdf
211x7-DSH-001-C.pdf
211x7-EVMD-001 - M21147/M21167 EVM User Guide 211x7-EVMD-001
160x160 non-blocking array crosspoint switch
JTAG boundary scan
1.2 V core and optional 1.2 V/1.8 V Output supply voltages
Flexible configuration through standard 2-wire and 4-wire serial interfaces, as well as parallel interface
Individual lane LOS (Loss Of Signal) detection and squelch
Individual or globally programmable output de-emphasis up to 12 dB
Individual or globally programmable input equalization up to 23 dB
Low power dissipation
MACOM_general.png
M21167G-11_IPC-1752-2_v11a_ASEK.pdf
M21024 询问 24 x 24
12.5 21 x2 1mm
BGA
1.2
I No-O 1.2- 1.8
24
No
No
fully non-blocking asynchronous crosspoint switches that operate at all data rates from 100 Mbps to 12.5 G
M21024_M21036_M21048.pdf
210xx-EVMD-002 - M21048/M21024 Evaluation Module User Guide
24 x 24 non-blocking crosspoint switch
Electrical Idle (EI pass-through for PCIe, SAS, and SATA signaling support)
Individual lane LOS (Loss Of Signal) detection and squelch
Programmable output de-emphasis up to 10.5 dB
Jitter measurement tool
Integrated Pattern Generator & Checker
Data rates from 100 Mbps to 12.5 Gbps
Enables channels up to 40" at 12.5 G data rate
210xx-PBD-003 - M21048/36/24 Product Bulletin 210xx-PBD-003
MACOM_general.png
M21352 询问 8x8
4.2 10x10mm
72pinQFN
1.2
1.2-1.8
8
No
No
询问 Programmable Equalization for greater than 40" of FR-4 PCB trace at 4.25 Gbps
Integrated 8x8 Crosspoint Switch Matrix
Extended case temperature range (-20°C to 85°C)
10x10 mm, 72 pin MLF package
HW, SW, AND EEPROM programmable
Up to 16 dB of input equalization and 6 dB of output de-emphasis
Low power dissipation: 115 mW per channel, 915 mW total power at 1.2V
Eight channel programmable equalizer for data rates up to 4.25 Gbps
Supports electrical idle signaling for PCIe and OOB signaling for SATA/ SAS
M21351-BRF-001-D.pdf
MACOM_general.png
M21352G-13_IPC-1752-2_v1-1a_Amkor.pdf
M21352G-13_IPC-1752-2_v11a_AmkorK_au.pdf
M21105 询问 4x4
3.2 10x10mm
72terminalQFN
1.2
1.8-2.5-3.3
4
Yes
Yes
询问 Integrated adaptive equalization allows use of lower cost board materials with increased link performance
Four independent multi-rate CDRs capable of running between 42 Gbps and 3.2 Gbps
Independent per-channel bit rates of up to 3.2 Gbps
Protocol aGnostic analog monitoring for system diagnostic: Loss of signal, Loss of lock, Loss of activity
Operation with or without a reference clock
Jitter generation 2.5 mUI, jitter tolerance 0.65 UI typical
Flexible DC-coupled input interface to CML, LVPECL and InfiniBand
Typical total power consumption as low as 420 mW with all channels running
Integrated pre-emphasis for driving trace lengths up to 60"
LTBDWOR110.pdf
LTBDWR117.pdf
LTBDWR112.pdf
21105-BRF-001-B.pdf
615954A.jpg
M21105G-12_IPC-1752-2_v11a_AmkorK.pdf
M21452 询问 8x8
6.5 10x10mm
72pinQFN
1.2
1.2-1.8
8
No
No
eight channel 6.5 Gbps backplane
21452-DSH-001-D.pdf
Fully non-blocking switch matrices
Data rate independent
Extended temperature range (-40° to 85° C)
1.2 Volt core / optional 1.2, 1.8 or 2.5 Volt IO
Protocol agnostic
Out of band signaling support
Small QFN packages
Low 120 mW per channel power usage
CN-073009_M21XXX_Test_and_Ship.pdf
M2145x-BRF-001-D.pdf
MACOM_general.png
M21452G-12P_IPC-1752-2_v1-1a_Amkor.pdf
M21452G-13_IPC-1752-2_v11a_AmkorK_au.pdf
M21452G-13_IPC-1752-2_v1-02.pdf
M21453 询问 12x12
6.5 12x12mm
88pinQFN
1.2
1.2-1.8
12
No
No
12 channel 6.5 Gbps backplane signal conditioner
21453-DSH-001-D.pdf
Fully non-blocking switch matrices
Data rate independent
Extended temperature range (-40° to 85° C)
1.2 Volt core / optional 1.2, 1.8 or 2.5 Volt IO
Protocol agnostic
Out of band signaling support
Small QFN packages
Low 120 mW per channel power usage
24 dB equalization and 6 dB of de-emphasis available
CN-073009_M21XXX_Test_and_Ship.pdf
M2145x-BRF-001-D.pdf
MACOM_general.png
M21453G-13_IPC-1752-2_v1.02_Amkor.pdf
M21330 询问 4x4
4.2 6x6mm
40pinQFN
1.2
1.2-1.8
4
No
No
21330-DSH-001-E.pdf
Four Fully Independent, Adaptive Equalizers
Data Rate Independent
Extended Temp Range (-40°C to 85°C)
1.2 Volt Core / Optional 1.2,1.8 or 2.5 Volt IO
Protocol Agnostic
Out of Band Signaling Support
Small 6 x 6 mm QFN package
Low 550 mW Power usage
40 dB+ Equalization and 6 dB of De-Emphasis Available
MACOM_general.png
M21330G-13_IPC-1752-2_v1-1a_Amkor.pdf
M21330G-14_IPC-1752-2_v1-1a_ASEM.pdf
M21353 询问 12x12
10.3 12x12mm
88pinQFN
1.2
1.2-1.8
12
No
No
询问 Programmable Equalization for greater than 40" of FR-4 PCB trace at 4.25 Gbps
Integrated 12x12 Crosspoint Switch Matrix
Extended case temperature range (-20°C to 85°C)
12x12 mm, 88 pin MLF package
HW, SW, AND EEPROM programmable
Up to 16 dB of input equalization and 6 dB of output de-emphasis
Low power dissipation: 115 mW per channel, 1.4 W total power at 1.2V
Twelve channel programmable equalizer for data rates up to 4.25 Gbps
Supports electrical idle signaling for PCIe and OOB signaling for S-ATA/SAS
M21351-BRF-001-D.pdf
MACOM_general.png
M21353G-13_IPC-1752-2_v1-02.pdf
M21141 询问 72x72
4.2 35x35mm
1156terminalBGA
1.2
1.2-1.5-1.8
72
Yes
Yes
211xx-APP-006-A - SMT BGA (Ball Grid Array) Eutectic Solder Balls Application Note Products Affected: M21131, M21131V, M21136, M21141G4, M21141G5, M21151, M21151V, M21156, M21161G4, M21161G5
询问 PowerScaler™ for further power reduction based on system needs
Low-power consumption of 6.5W
Built-in system test features such as JitterMeter™ and PRBS Tx/Rx
Supports any data rate from 0 to 4.25 Gbps
Input signal activity monitoring
Programmable output pre-emphasis for driving long board traces and cables
Programmable input equalizer to reduce deterministic jitter (ISI), caused by board traces and cables
Pin and Software compatible with M21131
CN-102910 211XX Test.pdf
211XX_CPCore_PCN_071210.pdf
211XX Ship PCN 052110.pdf
211XX CPCore PCN 043010.pdf
21141-BRF-001-B.pdf
211xx-PBD-004-A.pdf
29320-PBD-002-A.pdf
MACOM_general.png
M21141-14_IPC-1752-2_v1-1a_ASE.pdf
M21141G-24_IPC-1752-2_v1-1a_ASEK.pdf
M21141G-14_IPC-1752-2_v11a_ASEK.pdf
M21141G-14_IPC-1752-2_v1-02.pdf
M21141G-13_IPC-1752-2_v1-02.pdf
M21141-24_IPC-1752-2_v11a_ASEK.pdf
M21351 询问 4x4
4.2 6x6mm
40pinQFN
1.2
1.2-1.8
4
No
No
询问 Programmable Equalization for greater than 40" of FR-4 PCB trace at 4.25 Gbps
Integrated 4x4 Crosspoint Switch Matrix
Extended case temperature range (-20°C to 85°C)
12x12 mm, 88 pin MLF package
HW, SW, AND EEPROM programmable
Up to 16 dB of input equalization and 6 dB of output de-emphasis
Low power dissipation: 115 mW per channel, 1.4 W total power at 1.2V
Four channel programmable equalizer for data rates up to 4.25 Gbps
Supports electrical idle signaling for PCIe and OOB signaling for S-ATA/SAS
CN-042011A-1.pdf
M21351-BRF-001-D.pdf
MACOM_general.png
M21351G-14_IPC-1752-2_v11a_ASEM_au.pdf
M23636 询问 36x36
6.5 23x23mm
484pinBGA
1.2
I No-O 1.2- 1.8
36
No
No
a 36x36 asynchronous fully non-blocking crosspoint switch operating at data rates up to 6.5 Gbps.
210xx-APP-001 - Migration Path from M23636/M21148 6.5 Gbps to M21036/M21048 11.5 Gbps Crosspoint Switches Application Note
M21148_M23636.pdf
211XX-PBD-011 - M23636/M21148 Product Bulletin 211xx-PBD-011
2XXXX-PBD-001 - M21148/M23636 Crosspoint Switch - Final Test Improvement Product Bulletin 2xxxx-PBD-001
MACOM_general.png
M23636G-15_IPC-1752-2_v11a_ASEK.pdf
M21148G-14_IPC-1752-2_v1-1a_ASEK.pdf
M21161 询问 144x144
4.2 35x35mm
1156terminalBGA
1.2
1.2-1.5-1.8
144
Yes
Yes
211xx-APP-006-A - SMT BGA (Ball Grid Array) Eutectic Solder Balls Application Note Products Affected: M21131, M21131V, M21136, M21141G4, M21141G5, M21151, M21151V, M21156, M21161G4, M21161G5
询问 Programmable output pre-emphasis for driving long board traces and cables
PowerScaler™ for further power reduction based on system needs
Input signal activity monitoring
Supports any data rate from 0 to 4.25 Gbps
Low-power consumption of 13 W
Built-in system test features such as JitterMeter™ and PRBS Tx/Rx
Programmable input equalizer to reduce deterministic jitter (ISI), caused by board traces and cables
Pin and Software compatible with M21151
211XX_CPCore_PCN_071210.pdf
CN-102910-211XX-Test.pdf
211XX-Ship-PCN-052110.pdf
211XX-CPCore-PCN-043010.pdf
21141-BRF-001-B.pdf
211xx-PBD-004-A.pdf
29320-PBD-002-A.pdf
MACOM_general.png
M21161-25_IPC-1752-2_v11a_ASEK.pdf
M21161G-25_IPC-1752-2_v11a_ASEK.pdf
M21161G-15_IPC-1752-2_v11a_ASEK.pdf
m21161g-15_ipc-1752-2_v1-02.pdf
M21161G-14_IPC-1752-2_v11a_ASEK.pdf
m21161g-14_ipc-1752-2_v1-02.pdf
M21443 询问 12x12
4.2 14x14mm
100pinTQFP
1.2
1.2-1.8
12
No
No
询问 Programmable Equalization for up to 40" of FR-4 PCB trace at 4.25 Gbps
Integrated 12x12 Crosspoint Switch Matrix
Industrial temperature range (-40° C to 85° C)
14x14 mm, 100-pin eTQFP package
HW, SW, AND EEPROM programmable
Up to 23 dB of input equalization and 6 dB of output de-emphasis
Low power dissipation: 115 mW per channel, 1.4 W total power at 1.2V
Independently programmable output drive and de-emphasis levels
Supports electrical idle signaling for PCIe and OOB signaling for S-ATA/SAS
628702A.pdf
M21143-BRF-001-A.pdf
MACOM_general.png
M21443G-13_IPC-1752-2_v1-02.pdf
M21443G-13_IPC-1752-2_v11a_AmkorK_Au.pdf
M21111 询问 17x17
3.2 23x23mm
404pinPBGA
2.3-3.3
17
No
No
211x1-APP-001-A - SMT Lead-Free Packages Application Note Products Affected: M21111, M21121
询问 Industry's lowest power consumption of 1.75 Watts
Data rates range from 0 to 3.2 Gbps
Built-in test feature: PRBS Tx/Rx
RoHS package option
Input Equalizer to reduce deterministic jitter
No heat sink required
2xxxx-PCN-007-A.pdf
CN-102810-21XXX-Test.pdf
CN-021010.pdf
21111-BRF-001-D.pdf
621903A.jpg
m21111g-11_ipc-1752-2_v1-02.pdf
M21444 询问 12x12
4.2 14x14mm
100pineTQFP
2.4
1.2-1.8
12
Yes
询问 M21444G-13_IPC-1752-2_v1-1a_Amkor.pdf
M21444G-13_IPC-1752-2_v11a_AmkorK_Au.pdf
M21362 询问 8x8
5.5 10x10mm
72pinQFN
1.7
1.2-1.8
Yes
Yes
询问 M2136x-BRF-001-B.pdf
M21362G-13_IPC-1752-2_v1-1a_Amkor.pdf
M21362G-13_IPC-1752-2_v11a_AmkorK_au.pdf
M21363 询问 12x12
5.5 12x12mm
88pinQFN
2.4
1.2-1.8
12
Yes
Yes
询问 M2136x-BRF-001-B.pdf
M21363G-13P_IPC-1752-2_v1-02.pdf
M21601 询问 120x120
12.5 45x45mm
1924pinBGA
1.8
1.8
120
No
No
12.5G 120x120 Crosspoint
M21605_M21601_M21080.pdf
120x120 non-blocking array crosspoint switch with low power dissipation
Low latency, less than 2 ns
Four integrated temperature sensors with programmable alarm
JTAG boundary scan
1.8, 2.5, and 3.3 V digital core voltages
1.8 V core and high-speed I/O voltage
Auxiliary high-speed input and output for monitoring and testing
Flexible configuration through standard 2-wire serial, 4-wire serial interfaces or 8-bit parallel interface
Individual lane LOS (Loss Of Signal) detection and squelch
Programmable output post tap de-emphasis up to 12 dB total and 5 dB total of pre-tap de-emphasis
Programmable input equalization to compensate for up to 27 dB of loss at 6.25 GHz
M21605 询问 160x160
12.5 45x45mm
1924pinBGA
1.8
1.8
160
No
No
12.5G 160x160 Crosspoint
21605-APP-001-B-Thermal Application Note.pdf
21605-APP-002 - Migration Path from M21165/67 (6.5 Gbps) to M21605 (12.8 Gbps) Crosspoint Switch Application Note 21605-APP-002
21605-APP-003 - M21605 Input EQ Settings Application Note 21605-APP-003
M21605_M21601_M21080.pdf
21605-USER GUIDE.pdf
160x160 non-blocking array crosspoint switch with low power dissipation
Four integrated temperature sensors with programmable alarm
JTAG boundary scan
1.8, 2.5, and 3.3 V digital core voltages
1.8 V core and high-speed I/O voltage
Auxiliary high-speed input and output for monitoring and testing
Flexible configuration through standard 2-wire serial, 4-wire serial interfaces or 8-bit parallel interface
Individual lane LOS (Loss Of Signal) detection and squelch
Programmable output post tap de-emphasis up to 12 dB total and 5 dB total of pre-tap de-emphasis
Programmable input equalization to compensate for up to 27 dB of loss at 6.25 GHz
Low latency, less than 2 ns
M21605G-12P_IPC-1752-2_v11a_ASEK.pdf
MAXP-37161 询问 16x16
28.1 BGA
1.8
16
Yes
16 Channel, 28 Gbps Crosspoint Switch & Signal Conditioners
4722505830001
询问 16-channel Crosspoint Switch with Signal Conditioners
CDRs Operate Without or With Reference Clock (reference clock is optional)
Single 1.8 V Power Supply (VDDIO 3.3V optional)
Programmable Output Swing and De-Emphasis Levels
Low Power Operation
Integrated Non-Blocking Crosspoint Switches
Adaptive Continuous Time Linear Equalizer (ADCTLE), Decision Feedback Equalizer (DFE) and Three-Tap De-emphasis
MAXP-37161A_PBD_1_-.pdf
Macom gen.png
MAXP-23016 询问 16x16
12.5 15x15mm
BGA
1.2
1.2/1.8
16
No
No
12.5 Gbps Crosspoint Switch Family
询问 16x16 Non-Blocking Crosspoint Switch
Integrated Pattern Generator and Checker
Support any data rates From 100 Mbps to 12.5 Gbps
Individual lane LOS (Loss Of Signal) detection and squelch
Enables channels up to 40" at 12.5 Gbps
Support Out-Of-Band (OOB) signaling
Global or Individual Programmable Input Equalization to compensate up to 24 dB of loss at 5.16 GHz and 20 dB of loss at 6.25 GHz
Global or Individual Programmable Output De-Emphasis up to 10.5 dB
MACOM Gen.png
MAXP-23012 询问 12x12
12.5 15x15mm
BGA
1.2
1.2/1.8
12
No
No
12.5 Gbps Crosspoint Switch Family
询问 12x12 Non-Blocking Crosspoint Switch
Integrated Pattern Generator and Checker
Support any data rates From 100 Mbps to 12.5 Gbps
Individual lane LOS (Loss Of Signal) detection and squelch
Enables channels up to 40" at 12.5 Gbps
Support Out-Of-Band (OOB) signaling
Global or Individual Programmable Input Equalization to compensate up to 24 dB of loss at 5.16 GHz and 20 dB of loss at 6.25 GHz
Global or Individual Programmable Output De-Emphasis up to 10.5 dB
MACOM Gen.png
MAXP-23008 询问 8x8
12.5 15x15mm
BGA
1.2
1.2/1.8
8
No
No
12.5 Gbps Crosspoint Switch Family
询问 8x8 Non-Blocking Crosspoint Switch
Integrated Pattern Generator and Checker
Support any data rates From 100 Mbps to 12.5 Gbps
Individual lane LOS (Loss Of Signal) detection and squelch
Enables channels up to 40" at 12.5 Gbps
Support Out-Of-Band (OOB) signaling
Global or Individual Programmable Input Equalization to compensate up to 24 dB of loss at 5.16 GHz and 20 dB of loss at 6.25 GHz
Global or Individual Programmable Output De-Emphasis up to 10.5 dB
MACOM Gen.png