激光器和调制器驱动器 - FTTx

image-from-the-document-manager

MACOM公司提供广泛的光调制器驱动器产品组合,适用于距离从几百米到几千公里的应用,支持从1 Gbps到100 Gbps甚至更高的数据传输速率。产品包括高性能Mach-Zehnder调制器驱动器,外调制激光器 (EML) 驱动器和直接调制激光器 (DML)驱动器。这些驱动器产品采用砷化镓、磷化铟及硅锗技术开发,提供的解决方案适用于FTTx及短距离可插拔收发器到潜艇用超长距离应答器等各种应用。当前系统所用的驱动器通常采用限幅模式,而采用高阶调制方案的下一代高速系统采用线性驱动器。MACOM公司提供多种封装形式的驱动器产品,包括GPPO模块、表面贴装以及以裸片形式集成在TOSA中。此外,还可提供单通道、双通道及四通道型号。MACOM公司所有的驱动器产品都致力于在尽可能缩减尺寸的同时,最大程度地提高信号完整性并尽量降低功率消耗。

搜索历史
最近浏览的产品
  • 未找到最新产品!

条件搜索

部件号 订货 描述 Package Size 最大数据速率(Gbps) 封装类型 电源电压 Power Consumption (W) 通道数量 Max Output Mod Current (mA) Max Output Bias Current (mA) Burst Mode Driver Input Sensitivity (mV) Limiting Amplifier Input Sensitivity (mV) 嵌入CDR Limiting Amplifier Output Swing Voltage (mV) 用户通知 硬件手册 应用笔记 特性 优势 标志 引线精加工 兼容部件 产品照片 开关矩阵 Embedded SerDes MSL ESD 产品介绍 模型数据(Sparameters) Last Time Buys 产品公告 RoHS/IPC报告 EVM/Reference Design Guides Reference Design/Schematic 外形图 质量报告 Brightcove视频 ADS & SPICE模型信息 数据手册封装概述 设备固件 EVM GUI软件 EVM用户手册 目录 Associated Part Compatible Part
 
 
 
 
 
 
M02098 询问 Burst Mode Laser Driver/Limiting Amplifier
5mm QFN
2.5 5mm QFN
3.3
0.28
1
100 02098-DSH-001.pdf
Auxiliary 9-bit DAC, 12-bit A/D
Operating temperature -40°C to +100°C, 5x5 QFN package
Tx system current reduced during Burst-off
Supports IEC-60825 eye safety, including programmable bias and modulation current limits
Programmable SPI or 2-wire interface from external EEPROM or optional microcontroller. (Separate slave and master interfaces.)
Limiting Amplifier 10 mV input sensitivity at 2.67 Gbps, selectable gain and bandwidth, signal detect and Jam functions
02098-PBD-002 - M02098 SPI Interface and FAIL Pin Behavior Product Bulletin
M02076 询问 Laser driver/limiting amplifier + DDMI controller and APD DC-DC controller
4mm QFN
3.1 4mm QFN
3.3
0.205
1
100 M02076_M02077.pdf
02099-APP-001 - App Note M02099 M02100 M02076 M02077 M02150 M02151 Test Summary of DC-DC Controller
100 Mbps to 3.1 Gbps operation
Integrated Laser safety features and laser shutdown switch
2-wire interface for control of set-up and EEPROM read/write with 3 level password protection (User, Vendor and No Password)
4 selectable modes of laser control: Dual Closed Loop, Single Closed Loop (bias), Single Closed Loop (modulation) or Open Loop
Limiting Amplifier 6 mV input sensitivity at 3.1 Gbps, selectable gain and bandwidth, DAC programmable signal detect threshold
Real time diagnostics, and alarm warning flags
Laser driver bias and modulation current up to 100 mA. Typical rise/fall times < 60 ps
Low power operation, < 75 mA typical (excluding laser current)
Operating temperature -40 °C to +95 °C, 4x4 mm QFN package
M02099 询问 Burst Mode Laser Driver/Limiting Amplifier + DDMI Controller and APD DC-DC Controller
4mm QFN
3.1 4mm QFN
3.3
0.225
1
100 M02099-15_M02100-15.pdf
M02099_M02100_M02076_M02077_M02150_M02151_Application note.pdf
100 Mbps to 3.1 Gbps operation
Internal non-volatile memory for storing calibration constants
Limiting Amplifier 5 mV input sensitivity at 3.1 Gbps, selectable gain and bandwidth, DAC programmable signal detect threshold
Integrated Tx_SD and Burst TxPwrMon
Laser driver bias and modulation current up to 100 mA. Typical rise/fall times < 60 ps. Burst on/off < 5 ns
3 Sleep modes and 2 burst-off current reduction modes
Low power operation, < 75 mA typical (excluding laser current)
Pulse width modulator for external DC-DC converter with control from an 8 bit DAC with temperature based look-up table stored in EEPROM
4 selectable modes of laser control: Dual Closed Loop, Single Closed Loop (bias), Single Closed Loop (modulation) or Open Loop
Laser shutdown switch
Isolated Rx and Tx power pins with independent shutdown
Operating temperature -40 °C to +95 °C, 4x4 mm QFN package
M02099_M02100_M02150_M02151_EUG_1.pdf
M02077 询问 Laser Driver/Limiting Amplifier
4mm QFN
3.1 4mm QFN
3.3
0.205
1
100 M02076_M02077.pdf
M02099_M02100_M02076_M02077_M02150_M02151_Application note.pdf
02099-APP-001 - App Note M02099 M02100 M02076 M02077 M02150 M02151 Test Summary of DC-DC Controller
100 Mbps to 3.1 Gbps operation
Operating temperature -40 °C to +95 °C, 4x4 mm QFN package
Integrated Laser safety features and laser shutdown switch
2-wire interface for control of set-up and EEPROM read/write with 3 level password protection (User, Vendor and No Password)
4 selectable modes of laser control: Dual Closed Loop, Single Closed Loop (bias), Single Closed Loop (modulation) or Open Loop
Limiting Amplifier 6 mV input sensitivity at 3.1 Gbps, selectable gain and bandwidth, DAC programmable signal detect threshold
Real time diagnostics, and alarm warning flags
Laser driver bias and modulation current up to 100 mA. Typical rise/fall times < 60 ps
Low power operation, < 75 mA typical (excluding laser current)
02077-EVMD-001 - M02077 Evaluation Module User Guide
02077-EVMD-001 - M02077 Evaluation Module User Guide
M02096 询问 2.5 Gbps, 3.3/5 V Laser Driver/Limiting Amplifier
5mm QFN
4.3 5mm QFN
3.3, 5
0.225
1
85 询问 High speed operation; suitable for applications to 4.3 Gbps. 65 ps typical Tx rise/fall time into 25 ohm
CML or PECL limiting amplifier outputs
3.3 mV typical input limiting amp sensitivity at 2.5 Gbps
SFP compliant safety circuitry (configurable)
Automatic Power Control
Temperature compensation for modulation current
Integrated power supply switch for redundant shutdown under a fault condition
Modulation current to 85 mA and bias current to 100 mA
Independently programmable bias and modulation currents
Polarity Control for both the driver and limiting amplifier data paths
Limiting amplifier includes integrated DC offset cancellation circuit
Operates with 3.3 V or 5 V supply with an internal auto-sensing regulator.
Powers 3.3 V ROSAs from its receiver regulator output enabling true 3.3/5 V designs using all 3.3 V Mindspeed TIAs
M02095 询问 2.5 Gbps, 3.3/5 V Laser Driver/Limiting Amplifier
5mm QFN
1.2 5mm QFN
3.3, 5
0.31
1
85 询问 High speed operation; suitable for applications to 4.3 Gbps. 65 ps typical Tx rise/fall time into 25 ohm
Automatic Power Control
Temperature compensation for modulation current
Integrated power supply switch for redundant shutdown under a fault condition
Modulation current to 85 mA and bias current to 100 mA
Independently programmable bias and modulation currents
Limiting amplifier includes integrated DC offset cancellation circuit
CML or PECL limiting amplifier outputs
3.3 mV typical input limiting amp sensitivity at 2.5 Gbps
SFP compliant safety circuitry (configurable)
Polarity Control for both the driver and limiting amplifier data paths
Operates with 3.3 V or 5 V supply with an internal auto-sensing regulator.
Powers 3.3 V ROSAs from its receiver regulator output enabling true 3.3/5 V designs using all 3.3 V Mindspeed TIAs
M02100 询问 Burst Mode Laser Driver/Limiting Amplifier + DDMI Controller and APD DC-DC Controller & EEPROM
4mm QFN
3.1 4mm QFN
3.3
0.225
1
100 M02099-15_M02100-15.pdf
02099-APP-001 - App Note M02099 M02100 M02076 M02077 M02150 M02151 Test Summary of DC-DC Controller
100 Mbps to 3.1 Gbps operation
Laser shutdown switch
Pulse width modulator for external DC-DC converter with control from an 8 bit DAC with temperature based look-up table stored in EEPROM
4 selectable modes of laser control: Dual Closed Loop, Single Closed Loop (bias), Single Closed Loop (modulation) or Open Loop
Internal non-volatile memory for storing calibration constants
Limiting Amplifier 5 mV input sensitivity at 3.1 Gbps, selectable gain and bandwidth, DAC programmable signal detect threshold
Integrated Tx_SD and Burst TxPwrMon
Laser driver bias and modulation current up to 100 mA. Typical rise/fall times < 60 ps. Burst on/off < 5 ns
3 Sleep modes and 2 burst-off current reduction modes
Low power operation, < 75 mA typical (excluding laser current)
Isolated Rx and Tx power pins with independent shutdown
Operating temperature -40 °C to +95 °C, 4x4 mm QFN package
M02099_M02100_M02150_M02151_EUG_1.pdf
M02180 询问 Burst Mode Laser Driver/Limiting Amplifier + Rx CDR + DDMI Controller and APD DC-DC Controller & EEPROM
12.5 M02180-12.pdf
MABT-011000.png
M02061 询问 4.3 Gbps, 3.3 or 5V Laser Driver
4x4mm
4.3 QFN
3.3,5
0.115
1
2.5 100 C
200 No
M02061-12_-21 - V6.pdf
Ideal for SFP/SFF modules from 155 Mbps to 4.25 Gbps
Programmable temperature compensation
3.3 V or 5 V operation
Automatic laser power control, with "slow-start"
DC or AC coupled modulation drive, up to 100 mA of modulation current available when AC coupled
Supports SFF-8472 diagnostics
MACOM_general.png
620978A.zip
MH07-X710_Rev_00.pdf
MH07-X700_Rev_00.pdf
M02171 询问 11.3 Gbps Dual Loop VCSEL Driver
5x5mm
11.3 QFN
3.3
0.1782
1
25 25 C
80 No
02171-DSH-001-E.pdf
Data rates to 11.3 Gbps. single 3.3 V supply
2-wire or SPI serial interface available
Input equalization for SFP+ requirements
Provides internal Vcc and ground switch for single point faults
Programmable VCSEL modulation current to 15 mA
Programmable VCSEL bias current to 15 mA
OMA control for average optical power and modulation amplitude
MACOM_general.png
D00086 - M02170/M02171/M02172 EVM User Guide 0217x-EVMD-001-A
M02170 询问 11.3 Gbps, 3.3 V Laser Driver
5x5mm
11.3 QFN
3.3
0.1914
1
100 180 C
80 No
02170-DSH-001-F.pdf
Low power FP/DFB driver (~65 mA)
2 extra DACs and ADCs (6, 10, 12-bit)
Input equalization
OMA control
Adjustable output compensation
MACOM_general.png
D00086 - M02170/M02171/M02172 EVM User Guide 0217x-EVMD-001-A
M02090 询问 2.5 Gbps, 3.3 V Burst-Mode Laser Driver/Limiting Amplifier
5x5mm
2.5 QFN
3.3
0.4785
1
100 80 C, B
200 8 No
400 CN-033011-0209X-Package.pdf
CN-042011A-1.pdf
询问 Integrated 2.5 Gbps burst-mode driver with limiting amplifier
Extended temperature range of -40°C to +100°C
2.5 ns burst on/off time
Dual digital closed-loop architecture, enables real time extinction ratio control
Dual 2-wire interface enables operation independently or with an external microcontroller
Up to 100 mA of modulation current and 80 mA of bias current
MACOM_general.png
02090-BRF-001-A.pdf
M02090G-14_IPC-1752-2_v11a_Unisem_Cu.pdf
M02090G-14-Cu-Wire_IPC-1752-2_v11a_ASEM.pdf
M02069 询问 highly integrated, programmable VCSEL driver intended for SFP/SFF modules to 4.3 Gbps
4x4mm
4.3 QFN
3.3, 5
0.095
1
45 50 C
200 No
M02069-12 - V2.pdf
High speed operation; suitable for SFP/SFF applications from 155 Mbps to 4.3 Gbps
3.3 or 5 V operation
Supports E-PON burst mode with no extra components
Low overshoot allows high extinction ratio with low jitter
Programmable temperature compensation. Modulation output and bias output can be controlled using the programmable module controller M02080 or a few discrete resistors.
DC or AC coupled modulation drive
Automatic laser power control, with "Slow-Start"
Supports DDMI (SFF-8472) diagnostics
Peaking circuit to optimize VCSEL response
Supports common anode VCSEL, common cathode VCSEL, or FP laser. May be used with or without a monitor photodiode.
MACOM_general.png
620978A.zip
MH07-X710_Rev_00.pdf
MH07-X700_Rev_00.pdf
M02067 询问 2.1 Gbps, 3.3 V Laser Driver
4x4mm
2.1 QFN
3.3
0.17
1
85 100 C
200 No
02067L_Package_PCN_072309.pdf
CN-042011A-1.pdf
CN-021710c-M02067-Test-TR-Transfer.pdf
CN-021710b-1.pdf
CN-021010.pdf
M02067-12_-13 - V4.pdf
0206x-APP-002-A - M02063/6/7/8/9 Application Note: Designing a Burst Mode Laser Driver with Open Loop APC Control1
Rise and fall times <110 ps
Available in a BCC24 package
Output flags indicate laser end-of-life and APC failure
Operates with +3.3 V supply
Bias and modulation current monitors
Automatic laser power control with programmable temperature compensation and "slow-start"
Bias current to 100 mA and modulation current to 85 mA at VCC = 3.3 V
Independently programmable laser bias and modulation currents
DC or AC coupled modulation drive
MACOM_general.png
M02067G-09-T_IPC-1752-2_v1-02.pdf
M02067G-12_IPC-1752-2_v11a_ASEM.pdf
M02067G-11_IPC-1752-2_v11a_ASEM.pdf
M02067G-09-T_IPC-1752-2_v11a_ASEK_au.pdf
M02066 询问 highly integrated, programmable laser driver intended for short-reach SONET/SDH applications.
4x4mm
2.5 BCC+24L
3.3
0.19
1
85 100 C
300 No
02066-PCN-003-A.pdf
CN-092309_0206x_Amkor.pdf
CN-041610_0206x_TR.pdf
CN-021010.pdf
02066-DSH-001-D.pdf
0206x-APP-002-A - M02063/6/7/8/9 Application Note: Designing a Burst Mode Laser Driver with Open Loop APC Control1
High-speed operation, suitable for applications to 3 Gbps
Available in RoHS compliant packages
M02066-82 is available in a TQFP32 package
M02066-21 and M02066-51 are available in a BCC+24 package
Operates with +3.3 volt supply
Bias and modulation current monitor
Automatic laser power control with programmable temperature compensation and ‘Slow-Start’
Bias current to 100 mA and modulation current to 85 mA at VCC = 3.3 V
Independently programmable laser bias and modulation currents
Differential data and clock inputs to minimize pattern dependent jitter
DC or AC coupled modulation drive
Typical rise/fall times of 90 ps
MACOM_general.png
02066-BRF-001-A.pdf
M02066G-21_IPC-1752-2_v11a_ASEK_au.pdf
M02066G-82_IPC-1752-2_v11a_AmkorP_Au.pdf
M02066G-51_IPC-1752-2_v11a_ASEK_au.pdf
M02172 询问 11.3 Gbps EML Driver
5x5mm
11.3 QFN
3.3
0.2838
1
2.5 180 C
80 No
02172-DSH-001-E.pdf
Data rates to 11.3 Gbps. single 3.3 V supply
Supports both CA and CC laser configurations
Provides internal Vcc switch for single point faults
SFP/XFP compliant safety circuitry
Programmable laser modulation voltage to 2.5 Vpp
Programmable laser bias current to 150 mA
MACOM_general.png
02172-EVMD-001.pdf
D00086 - M02170/M02171/M02172 EVM User Guide 0217x-EVMD-001-A
M02094 询问 highly integrated, programmable VCSEL driver intended for SFP/SFF modules to 2.0 Gbps
4x4mm
2 QFN
3.3, 5
0.1155, 0.175
1
45 50 B
300 No
M02094-12 - V5.pdf
High-speed operation; suitable for SFP/SFF applications from 155 Mbps to 2.0 Gbps
3.3 or 5 V operation
Automatic laser power control, with "Slow-Start"
Supports E-PON burst mode with no extra components
Low overshoot allows high extinction ratio with low jitter
Peaking circuit to optimize VCSEL response
DC or AC coupled modulation drive
Supports DDMI (SFF-8472) diagnostics
Programmable temperature compensation. Modulation output and bias output can be controlled using a few discrete resistors.
Supports common anode VCSEL, common cathode VCSEL, or FP Laser. May be used with or without a monitor photodiode.
Typical rise/fall times < 110 ps
MACOM_general.png
620978A.zip
MH07-X690_Rev_00.pdf
MH07-X680_Rev_00.pdf
M02068 询问 highly integrated, programmable laser driver intended for telecom applications up to 622 Mbps
4x4mm
1 BCC+24L
3.3
0.14
1
85 100 C
300 No
CN-041610_0206x_TR.pdf
CN-092309_0206x_Amkor.pdf
02068-DSH-001-C.pdf
0206x-APP-002-A - M02063/6/7/8/9 Application Note: Designing a Burst Mode Laser Driver with Open Loop APC Control1
Rise and fall times
Available in die form and BCC24 packages
Output flags indicate laser end-of-life and APC failure
Low-cost CMOS
Operates with +3.3 V supply
Bias and modulation current monitors
Automatic laser power control with programmable temperature compensation and 'slow-start'
Bias current to 100 mA and modulation current to 85 mA at VCC = 3.3 V
Independently programmable laser bias and modulation currents
DC or AC coupled modulation drive
MACOM_general.png
M02068G-09-T_IPC-1752-2_v11a_ASEK.pdf
M02068G-15-T_IPC-1752-2_v11a_AmkorP_Au.pdf
M02097 询问 500 Mbps, 3.3/5 V LED Driver/Limiting Amplifier
5x5mm
0.5 QFN
3.3, 5
0.12
1
120 C
300 2 No
800 02097-DSH-001-D.pdf
High-speed operation; suitable for applications to 500 Mbps
Polarity control for both the driver and limiting amplifier data paths
Limiting amplifier includes integrated DC offset cancellation circuit
PECL limiting amplifier outputs
6 mV input limiting amp sensitivity at 500 Mbps
SFP compliant safety circuitry (configurable)
Pre-bias adjustment to improve LED edge speed
Temperature compensation for modulation current
Integrated power supply switch for redundant shutdown under a fault condition
Programmable modulation current to 120 mA
200 ps typical rise/fall time into 5O
Powers 3.3 V ROSAs from its receiver regulator output enabling true 3.3/5 V designs using all 3.3 V Mindspeed TIAs
Operates with 3.3 V or 5 V supply with an internal auto-sensing regulator that enables with 5 V supplies and is bypassed with 3.3 V supplies
MACOM_general.png
MAOM-002304-DIE 询问 Quad Channel 28 Gbps Direct Modulated Laser Driver IC
2978 X 1378 X 100 µm thick
28 DIE
3
240
4
70 询问 MAMF-011039
MABT-011000.png
MAOM-002301 询问 Single Channel 28 Gbps Direct Modulated Laser Driver IC
878 X 1378 X 100 µm thick
28 Die
3
0.255
1
60 70 No
询问 NRZ Data rate up to 28 Gbps
No bias chokes required
Power Consumption (typical): 0.255 W per channel including DML power
Integrated monitor for Ibias current
Modulation Current (Imod) controllable: 10 ~ 60 mApp
DML Bias Current (Ibias) controllable: 20 ~ 70 mA
Differential input, single-ended output
MAMF-011039
MACOM gen.png
MAMF-011039
M02193 询问 12.5 Gbps Low Power Laser Driver and Limiting Amplifier with DC-DC Controller and EEPROM with Digital Diagnostics
4.5x4.5 mm QFN package
12.5 QFN Package
100 100 6 No
M02193.pdf
Macom gen.png
MALD-37030A 询问 28 Gbps Multi-Rate Laser Driver
5 mm x 6 mm LGA
26.5 LGA
3.3
1
76 100 No
30 10 Yes
750 询问 MACOM Gen.png
MALD-37031A 询问 28 Gbps Multi-Rate Laser Driver
5 mm x 6 mm LGA
28.1 LGA
3.3
1
76 100 No
30 10 Yes
750 询问 MACOM Gen.png
MALD-02101C 询问 3.1 Gbps Low Power Dual Closed Loop Burst Mode Laser Driver with Integrated Limiting Amplifier
4x4 mm
3.1 QFN
3.3
0.23
1
100 100 Yes
200 4 No
询问 MACOM Gen.png
MALD-02102C 询问 3.1 Gbps Low Power Dual Closed Loop Burst Mode Laser Driver with Integrated Limiting Amplifier
4x4 mm
3.1 QFN
3.3
0.23
1
100 100 Yes
200 4 No
询问 MACOM Gen.png
MALD-37345B 询问 Quad 28G VCSEL Driver with Input Equalizer
3 mm x 2 mm
28 Die
1.8 V & 3.3 V
0.5
4
No
询问 MATA-37344
General MACOM image.png
MATA-37344