激光器和调制器驱动器 - FTTx

激光器和调制器驱动器 - FTTx

MACOM公司提供广泛的光调制器驱动器产品组合,适用于距离从几百米到几千公里的应用,支持从1 Gbps到100 Gbps甚至更高的数据传输速率。产品包括高性能Mach-Zehnder调制器驱动器,外调制激光器 (EML) 驱动器和直接调制激光器 (DML)驱动器。这些驱动器产品采用砷化镓、磷化铟及硅锗技术开发,提供的解决方案适用于FTTx及短距离可插拔收发器到潜艇用超长距离应答器等各种应用。当前系统所用的驱动器通常采用限幅模式,而采用高阶调制方案的下一代高速系统采用线性驱动器。MACOM公司提供多种封装形式的驱动器产品,包括GPPO模块、表面贴装以及以裸片形式集成在TOSA中。此外,还可提供单通道、双通道及四通道型号。MACOM公司所有的驱动器产品都致力于在尽可能缩减尺寸的同时,最大程度地提高信号完整性并尽量降低功率消耗。

搜索历史
最近浏览的产品
  • 未找到最新产品!

条件搜索

releaseDate 部件号 订货 描述 最大数据速率(Gbps) 电源电压 封装类型 封装大小 功耗(W) 通道数量 最大输出调制电流(mA) 最大输出偏置电流(mA) 突发模式 驱动器输入灵敏度(mV) 限制放大器输入灵敏度(mV) 嵌入CDR 限幅放大器输出摆幅电压(mV) 用户通知 硬件手册 应用笔记 兼容部件 产品介绍 产品公告 RoHS/IPC报告 EVM/参考设计指南 参考设计/原理图 相关器件 Brightcove视频 产品照片 特性
 
 
 
 
 
 
M02098 采购 Burst Mode Laser Driver/Limiting Amplifier
2.5 3.3
5mm QFN
5mm QFN
0.28
1
100 02098-DSH-001.pdf
02098-PBD-002 - M02098 SPI Interface and FAIL Pin Behavior Product Bulletin
Auxiliary 9-bit DAC, 12-bit A/D
Operating temperature -40°C to +100°C, 5x5 QFN package
Tx system current reduced during Burst-off
Supports IEC-60825 eye safety, including programmable bias and modulation current limits
Programmable SPI or 2-wire interface from external EEPROM or optional microcontroller. (Separate slave and master interfaces.)
Limiting Amplifier 10 mV input sensitivity at 2.67 Gbps, selectable gain and bandwidth, signal detect and Jam functions
M02099 采购 Burst Mode Laser Driver/Limiting Amplifier + DDMI Controller and APD DC-DC Controller
3.1 3.3
4mm QFN
4mm QFN
0.225
1
100 M02099-15_M02100-15.pdf
M02099/M02100/M02076/ M02077/M02150/M02151 Test Summary of DC-DC Controller Products Affected: M02099, M02100, M02076, M02077, M02150, M02151 - M02099/M02100/M02076/ M02077/M02150/M02151 Test Summary of DC-DC Controller Products Affected: M02099, M02100, M02076, M02077, M02150, M02151
M02099_M02100_M02150_M02151_EUG_1.pdf
100 Mbps to 3.1 Gbps operation
Internal non-volatile memory for storing calibration constants
Limiting Amplifier 5 mV input sensitivity at 3.1 Gbps, selectable gain and bandwidth, DAC programmable signal detect threshold
Integrated Tx_SD and Burst TxPwrMon
Laser driver bias and modulation current up to 100 mA. Typical rise/fall times < 60 ps. Burst on/off < 5 ns
3 Sleep modes and 2 burst-off current reduction modes
Low power operation, < 75 mA typical (excluding laser current)
Pulse width modulator for external DC-DC converter with control from an 8 bit DAC with temperature based look-up table stored in EEPROM
4 selectable modes of laser control: Dual Closed Loop, Single Closed Loop (bias), Single Closed Loop (modulation) or Open Loop
Laser shutdown switch
Isolated Rx and Tx power pins with independent shutdown
Operating temperature -40 °C to +95 °C, 4x4 mm QFN package
M02077 采购 Laser Driver/Limiting Amplifier
3.1 3.3
4mm QFN
4mm QFN
0.205
1
100 M02076_M02077.pdf
M02099/M02100/M02076/ M02077/M02150/M02151 Test Summary of DC-DC Controller Products Affected: M02099, M02100, M02076, M02077, M02150, M02151 - M02099/M02100/M02076/ M02077/M02150/M02151 Test Summary of DC-DC Controller Products Affected: M02099, M02100, M02076, M02077, M02150, M02151
02099-APP-001 - App Note M02099 M02100 M02076 M02077 M02150 M02151 Test Summary of DC-DC Controller
02077-EVMD-001 - M02077 Evaluation Module User Guide
02077-EVMD-001 - M02077 Evaluation Module User Guide
100 Mbps to 3.1 Gbps operation
Operating temperature -40 °C to +95 °C, 4x4 mm QFN package
Integrated Laser safety features and laser shutdown switch
2-wire interface for control of set-up and EEPROM read/write with 3 level password protection (User, Vendor and No Password)
4 selectable modes of laser control: Dual Closed Loop, Single Closed Loop (bias), Single Closed Loop (modulation) or Open Loop
Limiting Amplifier 6 mV input sensitivity at 3.1 Gbps, selectable gain and bandwidth, DAC programmable signal detect threshold
Real time diagnostics, and alarm warning flags
Laser driver bias and modulation current up to 100 mA. Typical rise/fall times < 60 ps
Low power operation, < 75 mA typical (excluding laser current)
M02096 采购 2.5 Gbps, 3.3/5 V Laser Driver/Limiting Amplifier
4.3 3.3, 5
5mm QFN
5mm QFN
0.225
1
85 询问 High speed operation; suitable for applications to 4.3 Gbps. 65 ps typical Tx rise/fall time into 25 ohm
CML or PECL limiting amplifier outputs
3.3 mV typical input limiting amp sensitivity at 2.5 Gbps
SFP compliant safety circuitry (configurable)
Automatic Power Control
Temperature compensation for modulation current
Integrated power supply switch for redundant shutdown under a fault condition
Modulation current to 85 mA and bias current to 100 mA
Independently programmable bias and modulation currents
Polarity Control for both the driver and limiting amplifier data paths
Limiting amplifier includes integrated DC offset cancellation circuit
Operates with 3.3 V or 5 V supply with an internal auto-sensing regulator.
Powers 3.3 V ROSAs from its receiver regulator output enabling true 3.3/5 V designs using all 3.3 V Mindspeed TIAs
M02095 采购 2.5 Gbps, 3.3/5 V Laser Driver/Limiting Amplifier
1.2 3.3, 5
5mm QFN
5mm QFN
0.31
1
85 询问 High speed operation; suitable for applications to 4.3 Gbps. 65 ps typical Tx rise/fall time into 25 ohm
Automatic Power Control
Temperature compensation for modulation current
Integrated power supply switch for redundant shutdown under a fault condition
Modulation current to 85 mA and bias current to 100 mA
Independently programmable bias and modulation currents
Limiting amplifier includes integrated DC offset cancellation circuit
CML or PECL limiting amplifier outputs
3.3 mV typical input limiting amp sensitivity at 2.5 Gbps
SFP compliant safety circuitry (configurable)
Polarity Control for both the driver and limiting amplifier data paths
Operates with 3.3 V or 5 V supply with an internal auto-sensing regulator.
Powers 3.3 V ROSAs from its receiver regulator output enabling true 3.3/5 V designs using all 3.3 V Mindspeed TIAs
M02100 采购 Burst Mode Laser Driver/Limiting Amplifier + DDMI Controller and APD DC-DC Controller & EEPROM
3.1 3.3
4mm QFN
4mm QFN
0.225
1
100 M02099-15_M02100-15.pdf
02099-APP-001 - App Note M02099 M02100 M02076 M02077 M02150 M02151 Test Summary of DC-DC Controller
M02099_M02100_M02150_M02151_EUG_1.pdf
100 Mbps to 3.1 Gbps operation
Laser shutdown switch
Pulse width modulator for external DC-DC converter with control from an 8 bit DAC with temperature based look-up table stored in EEPROM
4 selectable modes of laser control: Dual Closed Loop, Single Closed Loop (bias), Single Closed Loop (modulation) or Open Loop
Internal non-volatile memory for storing calibration constants
Limiting Amplifier 5 mV input sensitivity at 3.1 Gbps, selectable gain and bandwidth, DAC programmable signal detect threshold
Integrated Tx_SD and Burst TxPwrMon
Laser driver bias and modulation current up to 100 mA. Typical rise/fall times < 60 ps. Burst on/off < 5 ns
3 Sleep modes and 2 burst-off current reduction modes
Low power operation, < 75 mA typical (excluding laser current)
Isolated Rx and Tx power pins with independent shutdown
Operating temperature -40 °C to +95 °C, 4x4 mm QFN package
M02180 采购 Burst Mode Laser Driver/Limiting Amplifier + Rx CDR + DDMI Controller and APD DC-DC Controller & EEPROM
12.5 M02180-12.pdf
MABT-011000.png
M02061 采购 4.3 Gbps, 3.3 or 5V Laser Driver
4.3 3.3,5
QFN
4x4mm
0.115
1
2.5 100 C
200 No
M02061-12_-21 - V6.pdf
620978A.zip
MH07-X710_Rev_00.pdf
MH07-X700_Rev_00.pdf
MACOM_general.png
Ideal for SFP/SFF modules from 155 Mbps to 4.25 Gbps
Programmable temperature compensation
3.3 V or 5 V operation
Automatic laser power control, with "slow-start"
DC or AC coupled modulation drive, up to 100 mA of modulation current available when AC coupled
Supports SFF-8472 diagnostics
M02170 询问 11.3 Gbps, 3.3 V Laser Driver
11.3 3.3
QFN
5x5mm
0.1914
1
100 180 C
80 No
02170-DSH-001-F.pdf
D00086 - M02170/M02171/M02172 EVM User Guide 0217x-EVMD-001-A
MACOM_general.png
Low power FP/DFB driver (~65 mA)
2 extra DACs and ADCs (6, 10, 12-bit)
Input equalization
OMA control
Adjustable output compensation
M02090 询问 2.5 Gbps, 3.3 V Burst-Mode Laser Driver/Limiting Amplifier
2.5 3.3
QFN
5x5mm
0.4785
1
100 80 C, B
200 8 No
400 CN-033011-0209X-Package.pdf
CN-042011A-1.pdf
询问 02090-BRF-001-A.pdf
M02090G-14_IPC-1752-2_v11a_Unisem_Cu.pdf
M02090G-14-Cu-Wire_IPC-1752-2_v11a_ASEM.pdf
MACOM_general.png
Integrated 2.5 Gbps burst-mode driver with limiting amplifier
Extended temperature range of -40°C to +100°C
2.5 ns burst on/off time
Dual digital closed-loop architecture, enables real time extinction ratio control
Dual 2-wire interface enables operation independently or with an external microcontroller
Up to 100 mA of modulation current and 80 mA of bias current
M02066 询问 highly integrated, programmable laser driver intended for short-reach SONET/SDH applications.
2.5 3.3
BCC+24L
4x4mm
0.19
1
85 100 C
300 No
02066-PCN-003-A.pdf
CN-092309_0206x_Amkor.pdf
CN-041610_0206x_TR.pdf
CN-021010.pdf
02066-DSH-001-D.pdf
0206x-APP-002-A - M02063/6/7/8/9 Application Note: Designing a Burst Mode Laser Driver with Open Loop APC Control1
02066-BRF-001-A.pdf
M02066G-21_IPC-1752-2_v11a_ASEK_au.pdf
M02066G-82_IPC-1752-2_v11a_AmkorP_Au.pdf
M02066G-51_IPC-1752-2_v11a_ASEK_au.pdf
MACOM_general.png
High-speed operation, suitable for applications to 3 Gbps
Available in RoHS compliant packages
M02066-82 is available in a TQFP32 package
M02066-21 and M02066-51 are available in a BCC+24 package
Operates with +3.3 volt supply
Bias and modulation current monitor
Automatic laser power control with programmable temperature compensation and ‘Slow-Start’
Bias current to 100 mA and modulation current to 85 mA at VCC = 3.3 V
Independently programmable laser bias and modulation currents
Differential data and clock inputs to minimize pattern dependent jitter
DC or AC coupled modulation drive
Typical rise/fall times of 90 ps
M02172 采购 11.3 Gbps EML Driver
11.3 3.3
QFN
5x5mm
0.2838
1
2.5 180 C
80 No
02172-DSH-001-E.pdf
02172-EVMD-001.pdf
D00086 - M02170/M02171/M02172 EVM User Guide 0217x-EVMD-001-A
MACOM_general.png
Data rates to 11.3 Gbps. single 3.3 V supply
Supports both CA and CC laser configurations
Provides internal Vcc switch for single point faults
SFP/XFP compliant safety circuitry
Programmable laser modulation voltage to 2.5 Vpp
Programmable laser bias current to 150 mA
M02068 询问 highly integrated, programmable laser driver intended for telecom applications up to 622 Mbps
1 3.3
BCC+24L
4x4mm
0.14
1
85 100 C
300 No
CN-041610_0206x_TR.pdf
CN-092309_0206x_Amkor.pdf
询问 0206x-APP-002-A - M02063/6/7/8/9 Application Note: Designing a Burst Mode Laser Driver with Open Loop APC Control1
M02068G-09-T_IPC-1752-2_v11a_ASEK.pdf
M02068G-15-T_IPC-1752-2_v11a_AmkorP_Au.pdf
MACOM_general.png
Rise and fall times
Available in die form and BCC24 packages
Output flags indicate laser end-of-life and APC failure
Low-cost CMOS
Operates with +3.3 V supply
Bias and modulation current monitors
Automatic laser power control with programmable temperature compensation and 'slow-start'
Bias current to 100 mA and modulation current to 85 mA at VCC = 3.3 V
Independently programmable laser bias and modulation currents
DC or AC coupled modulation drive
M02097 询问 500 Mbps, 3.3/5 V LED Driver/Limiting Amplifier
0.5 3.3, 5
QFN
5x5mm
0.12
1
120 C
300 2 No
800 02097-DSH-001-D.pdf
MACOM_general.png
High-speed operation; suitable for applications to 500 Mbps
Polarity control for both the driver and limiting amplifier data paths
Limiting amplifier includes integrated DC offset cancellation circuit
PECL limiting amplifier outputs
6 mV input limiting amp sensitivity at 500 Mbps
SFP compliant safety circuitry (configurable)
Pre-bias adjustment to improve LED edge speed
Temperature compensation for modulation current
Integrated power supply switch for redundant shutdown under a fault condition
Programmable modulation current to 120 mA
200 ps typical rise/fall time into 5O
Powers 3.3 V ROSAs from its receiver regulator output enabling true 3.3/5 V designs using all 3.3 V Mindspeed TIAs
Operates with 3.3 V or 5 V supply with an internal auto-sensing regulator that enables with 5 V supplies and is bypassed with 3.3 V supplies
MAOM-002304-DIE 询问 Quad Channel 28 Gbps Direct Modulated Laser Driver IC
28 3
DIE
2978 X 1378 X 100 µm thick
240
4
70 询问 MAMF-011039
MABT-011000.png
MAOM-002301 询问 Single Channel 28 Gbps Direct Modulated Laser Driver IC
28 3
Die
878 X 1378 X 100 µm thick
0.255
1
60 70 No
询问 MAMF-011039
MAMF-011039
MACOM gen.png
NRZ Data rate up to 28 Gbps
No bias chokes required
Power Consumption (typical): 0.255 W per channel including DML power
Integrated monitor for Ibias current
Modulation Current (Imod) controllable: 10 ~ 60 mApp
DML Bias Current (Ibias) controllable: 20 ~ 70 mA
Differential input, single-ended output
M02193 询问 12.5 Gbps Low Power Laser Driver and Limiting Amplifier with DC-DC Controller and EEPROM with Digital Diagnostics
12.5 QFN Package
4.5x4.5 mm QFN package
100 100 6 No
M02193.pdf
Macom gen.png
1 Gbps to 12.5 Gbps Tx and Rx operation
Low power operation, ~90mA typical (excluding laser and 25Ω output termination current)
Laser driver bias to 100mA and modulation current up to 100 mA (Laser DC coupled)
Optional 2.5V operation for VCCR and VCCT
2017/03/19 MALD-37030A 询问 28 Gbps Multi-Rate Laser Driver
26.5 3.3
LGA
5 mm x 6 mm LGA
1
76 100 No
30 10 Yes
750 询问 MACOM Gen.png
2017/03/19 MALD-37031A 询问 28 Gbps Multi-Rate Laser Driver
28.1 3.3
LGA
5 mm x 6 mm LGA
1
76 100 No
30 10 Yes
750 询问 MACOM Gen.png
2017/08/28 MALD-02101C 询问 3.1 Gbps Low Power Dual Closed Loop Burst Mode Laser Driver with Integrated Limiting Amplifier
3.1 3.3
QFN
4x4 mm
0.23
1
100 100 Yes
200 4 No
询问 MACOM Gen.png
2018/06/25 MALD-02079C 询问 3.1 Gbps Low Power Dual Closed Loop Laser Driver and Integrated Limiting Amplifier with DC-DC Controller and Digital Diagnostics
3.1 +3.05V to +3.55V
QFN
4x4
0.23
1
100 100 200 4 No
500 询问 General MACOM image.png
2019/04/15 MAOM-002311 询问 Single Channel Linear 28 Gbps Directly Modulated Laser Driver
28 3.3
4.0 x 4.0 x 1.38 mm LGA
1
100 询问 Symbol rate up to 28 Gbaud
Differential input and output
Output Amplitude: 28 ~ 57 mApp
Input Voltage: typical 800 mVpp differential
RoHS* Compliant
X

继续使用本网站,即表示您同意根据我们的 Cookie政策 使用cookie